The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Breva 750 V7 Small Twins 2004- Nevad Brakes

This section contains everything brake related from pads to banjo bolts and discs

Sort by Title

Sort by Price

Page 1 of 6

1 2 3 4 5 6

ENI Brake Fluid 1L DOT 4

BRA99003 Universal Part

Dimensions:
1 litre

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

part in stock More than 5 in stock

£13.75

INC VAT

£11.46 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Long Titanium

BRA36796 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats

Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.

Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap

part in stock More than 5 in stock

£7.80

INC VAT

£6.50 EX VAT this is the price you will pay if you are ordering from outside the UK

M10 Crush Washer Copper

BRA00001 Universal Part

Copper crush washer for brakeline connections, fits standard banjo bolt

Two M10 washers required per banjo bolt. Interchangeable with SIA10900

part in stock More than 5 in stock

25656100 GU25656100 25 65 61 00
2565 6100 2565.6100 25.65.61.00

£0.70

INC VAT

£0.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple Cover Brembo

BRA36794A Universal Part

Dimensions:
11mm overall height

Brembo rubber bleed nipple cap without retaining ring

part in stock More than 5 in stock

£1.00

INC VAT

£0.83 EX VAT this is the price you will pay if you are ordering from outside the UK

M10 Brake Bleed Nipple Cover

BRA36795 Universal Part

Rubber bleed nipple cap with retaining ring

Suitable only for M8 and M10 bleed nipples

part in stock More than 5 in stock

£1.00

INC VAT

£0.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Bolt Kit M10 With Bleed Nipple

BRA01006 Universal Part

Dimensions:
M10 x 1

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

part in stock More than 5 in stock

Also fits Benelli 250 TS

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

ENI Brake Fluid 500ml DOT 4

BRA99002 Universal Part

Dimensions:
500ml

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

part in stock More than 5 in stock

£7.92

INC VAT

£6.60 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 49cm

BRA00011 Universal Part

Dimensions:
49cm x 5mm x 8mm

49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£8.80

INC VAT

£7.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Front Brake Disc Bolt

BRA81286 Fits Griso 850, Griso 1100, Norge 1200 8V, Breva 750, 1200 Sport (Wavy Discs), Stelvio (2011-2015), Bellagio, Cali EV (2002-), Cali Vintage, V11 Sport ALL, V7 ALL, V7 II ALL, Nevada 750 (2002-2013), Centauro, 1100 Sport IE, 1100 Sport Corsa, MGS-01

Dimensions:
M8 x 20mm

Hex head brake disc bolt for front discs

Also known as Guzzi ref. 03611445. 6 bolts required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing

part in stock More than 5 in stock

AP8152286

£2.40

INC VAT

£2.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 99cm

BRA00012 Universal Part

Dimensions:
99cm x 5mm x 8mm

99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 1 of 6

1 2 3 4 5 6