Shop headings: New Spares | Used Spares | Accessories | Brands
Fibreglass triangular V7 Sport style side panel. Supplied unpainted, undrilled and without fixings. Ideal for the home special builder
Designed for early Tonti frames but may fit other models after appropriate modifications have been made. Two panels required per bike
More than 5 in stock
£32.00
INC VAT
£26.67 EX VAT
Dimensions:
35mm internal diameter x 70mm tall collar, approx. 105mm reach from stanchion to headlight bolt
Pair of Tommaselli chromed headlight brackets with anti vibration rubber collars and silver finish aluminium brackets. To fit 35mm and 36mm diameter forks.
1 in stock
£57.00
INC VAT
£47.50 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick
To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate
1 in stock
£99.00
INC VAT
£82.50 EX VAT
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included
1 in stock
£30.90
INC VAT
£25.75 EX VAT
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£18.00
INC VAT
£15.00 EX VAT
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
This part is due back in stock soon, call 01484 841395 to reserve yours
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£61.75
INC VAT
£51.46 EX VAT
Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube
38mm rise, these clip ons pivot on the central bolt to adjust the handlebar angle and height, pull back angle is adjusted on the fork stanchion clamp. Note that these cannot be used with a standard PS 12 master cylinder as there is insufficient clearance against the handlebar
Availability varies on this part, check availability
£170.00
INC VAT
£141.67 EX VAT
S&B air filter. Large circular K & N type air filter with chromed back, includes clip. Designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable. Best run dry for road. Fits square bodied VHB 30 carbs.
Either ENA14700 or ENA14157 can be used as a breather box to replace the unit in the airbox. See SIA00095 if you require a longer narrower filter with the same ID. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter
Availability varies on this part, check availability
£19.80
INC VAT
£16.50 EX VAT
Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.
Sorry, this part is no longer available.
Sorry this item is out of production