Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers

The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come

 More than 5 in stock

1A003632R

Stainless steel M8 dome head nut, used for exhaust studs, gearbox and drive box studs

Many applications including gearbox, exhaust and bevel box mounts on big twins, V7 850, V85TT and V100. Also used on small twins for bevel box mount bolts. Also known as Guzzi ref. 860651

 More than 5 in stock

M6 wavy washer

Also known as Guzzi ref. 95129115

 More than 5 in stock

 03013800 GU03013800 03 01 38 00
 0301 3800 0301.3800 03.01.38.00

Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.

See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636

 More than 5 in stock

1A003632R

Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro

Exhaust gasket for standard downpipes, less expensive alternative to factory part

Copper gasket

 5 in stock

 852090 MG852090

Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660

Mesh silencer gasket, silencer bush or muffler gasket shim for exhaust joint between silencer and downpipe

2 exhaust bushes required per bike

 2 in stock

2B007137

Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in polished finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers

Release the music in your Guzzi!
See this video to hear this silencer

 1 in stock

Pair of short black reverse cone stainless steel performance silencers from Mistral, the short reverse cone design compliments the pared back styling of the V9 models. Supplied with DB killer, gaskets and shorter black heat shields these are a more durable, stylish, lighter and better sounding than the original silencers.

Also available in satin or polished finish.

Euro 5 compliant
Useful increase in power and torque compared to the original silencers
5kg weight saving!
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Centre stands are compatible with these silencers and no special bracket is required.
No remap required No changes to the ECU map are required

Release the music in your Guzzi!

 1 in stock

HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 1 in stock

Exhaust gasket, silencer bush or muffler gasket shim for exhaust joint between silencer and downpipe

2 exhaust bushes required per bike

 This part is due back in stock soon, call 01484 841395 to reserve yours

 91113826 GU91113826 91 11 38 26
 9111 3826 9111.3826 91.11.38.26