Roller tappet kit C for converting your 4 valve per cylinder model to the later rollerised tappets

All 4v/cyl 1200 Sport models use this kit.

For Griso and Stelvio your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.02 from 2014. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

 This part is available by special order, request a quote

1A002082

Complete fuel pump assembly including the plate that mounts to the fuel tank

 This part is available by special order, request a quote

 978138 MG978138

Complete fuel pump assembly including the plate that mounts to the fuel tank

Supercedes Guzzi ref. 978825 and 887422

 This part is available by special order, request a quote

2D000017

Roller tappet kit A for converting your 4 valve per cylinder model to the later rollerised tappets

Your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.20 from 2013. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

 This part is available by special order, request a quote

1A002060

Complete fuel pump assembly including the plate that mounts to the fuel tank

Also known as 2D000018

 This part is available by special order, request a quote

 897636 MG897636

Roller tappet kit B for converting your 4 valve per cylinder model to the later rollerised tappets

Your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.02 from 2014. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

 This part is available by special order, request a quote

1A002063

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Pair of black 30 litre tough Xplorer panniers to fit Hepco and Becker pannier frames (fitted as OE to many models), ideal for enduro touring. Extremely endurable combination of black anodised aluminium sheet and coloured shock-resistant plastic.

• Completely waterproof thanks to special seals.

This tough pannier set is quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Supplied with aluminium lock adapter plates and two lock keys

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Pair of tough Xplorer panniers to fit Hepco and Becker pannier frames (fitted as OE to many models), ideal for enduro touring. Supplied as 1 x 30l (for exhaust side) and 1 x 40l pannier, this is an idea solution for models with high exhaust pipes as standard (e.g. Stelvio and V85 TT).

Extremely endurable combination of aluminium sheet and coloured shock-resistant plastic.

• Completely waterproof thanks to special seals.

This tough pannier set is quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits).

• New modern design
• Locks have a cylinder locking mechanism
• Many fastening possibilities for luggage straps
• Integrated handholds
• Top loading concept
• 100% water resistance
• Same closing system for all locks
• Special accessories available
Supplied with aluminium lock adapter plates and two lock keys. A helmet will fit in the 40l pannier

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]