One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

Dimensions:
1 litre

A set of 6 x titanium hex head brake disc bolts for front discs on all models except V7 III and V7 850 where you will need 2 kits (to cover front and rear) or 3 kits for V85TT and V100 where they are also used front and rear.

Also known as Guzzi ref. 03611445 2B009221 and 2B002416. 1 kit required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing.
Tensile strength of these bolts is 950 - 970Mpa.
Ideal for replacing standard disc bolts which corrode and have soft heads. These Ti bolts will look great for a very long time!

AP8152286

Dimensions:
M8 x 20mm

Titanium hex head brake disc bolt for front discs on all except V7 III, V7 850, V85TT and V100 where it is used front and rear. See SSA81288 for a kit of 6 bolts.

Also known as Guzzi ref. 03611445 2B009221 and 2B002416. 6 bolts required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing.
Tensile strength of these bolts is 950 - 970Mpa.
Ideal for replacing standard disc bolts which corrode and have soft heads. These Ti bolts will look great for a very long time!

AP8152286

Dimensions:
M8 x 20mm

Copper crush washer for brakeline connections, fits standard banjo bolt

Two M10 washers required per banjo bolt. Interchangeable with SIA10900

 25656100 GU25656100 25 65 61 00
 2565 6100 2565.6100 25.65.61.00

Rubber bleed nipple cap with retaining ring

Suitable only for M8 and M10 bleed nipples

Zinc finish M8 flanged screw

Front brake disc bolt on some models- checks parts book for exact listing. Some models use longer BRA81286 instead which is M8 x 20mm

AP8152285

Dimensions:
M8 x 16mm

Pair of organic EBC FA244 front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers)

Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736

 32654610 GU32654610 32 65 46 10
 3265 4610 3265.4610 32.65.46.10

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

95990028-z 95990028 GU95990028 95 99 00 28
 9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

Dimensions:
M10 x 1

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover
  
   More than 5 in stock

  Dimensions:
  M6 x 16mm

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Pair of EBC FA181TT rear brake pads

05654630-z 05654630 GU05654630 05 65 46 30
 0565 4630 0565.4630 05.65.46.30

Also fits Royal Enfield Himalayan (Front)