Gutsibits Guzzi spares
go to Gutsibits home pagego to about us pagesgo to the Shop got to Help Pages
  0 items
 Menu
The Shop

New Parts

Used Spares

Accessories

Guzzi Gifts

Mistral Exhausts
Our phone lines are closed, please  order online from our Shop

Show approximate prices

Our customers say...

official UK distributors of Mistral performance exhaust systems

authorised distributors of ENI Motorcycle oil products

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop      New Spares  V85 ALL  Exhausts

This section contains silencers, downpipes, H pipes, exhaust flanges and exhaust clamps

Sort by Title
Sort by Price
Page 1 of 4
1  2  3  4  
BoosterPlug Fuelling Fixer Euro 4
FUA85011 Fits V85TT (EURO4) 
click to view full sizeclick to view full size

The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

  • Improved and gentler throttle action when opening and closing throttle
  • Richer mixture when opening the throttle improves acceleration
  • Booster plug removes the uneven low speed running that is typical for modern lean burn engines
  • Stronger and more consistent at idle.
  • Reduced backfiring with aftermarket exhausts on engine braking
  • Improved fuel economy
  • Lifetime warranty View more information or download installation instructions. Not suitable for EURO5 bikes - see FUA85002 for these models

    this part is available by special order This part is available by special order, request a quote

  • £129.00

    INC VAT

    £107.50  EX VAT

    Exhaust Stud Kit Titanium
    SSA85048 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT, Cali 1400, Audace, 1200 Sport (4v/Cyl), Griso 1200 (4v/Cyl), Norge 1200 (4v/Cyl), Stelvio 
    click to view full sizeclick to view full size

    Dimensions:
    M8 x 48mm studs

    Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers

    The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come

    part in stock More than 5 in stock

    1A003632R

    £22.00

    INC VAT

    £18.33  EX VAT


    M8 Nut Stainless Steel Dome Head
    SSA08003 Universal Part
    click to view full size

    Stainless steel M8 dome head nut, used for exhaust studs, gearbox and drive box studs

    Many applications including gearbox, exhaust and bevel box mounts on big twins, V7 850, V85TT and V100. Also used on small twins for bevel box mount bolts. Also known as Guzzi ref. 860651

    part in stock More than 5 in stock

    £1.40

    INC VAT

    £1.17  EX VAT


    Wavy M6 Washer
    ENA03380 Universal Part
    click to view full size

    Dimensions:
    M6 x 12mm

    M6 wavy washer

    Also known as Guzzi ref. 95129115

    part in stock More than 5 in stock

     03013800 GU03013800 03 01 38 00
     0301 3800 0301.3800 03.01.38.00

    £0.90

    INC VAT

    £0.75  EX VAT


    Exhaust Stud M8 Titanium
    SSA85632 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT, Cali 1400, Audace, 1200 Sport (4v/cyl), Griso 1200 (4v/cyl), Norge 1200 (4v/cyl), Stelvio 
    click to view full sizeclick to view full size

    Dimensions:
    M8 x 48mm x 1.25

    Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.

    See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636

    part in stock More than 5 in stock

    1A003632R

    Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro

    £5.00

    INC VAT

    £4.17  EX VAT


    Gasket Exhaust Manifold
    ENA85091 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT 
    click to view full sizeclick to view full size

    Dimensions:
    44mm OD

    Exhaust gasket for standard downpipes, less expensive alternative to factory part

    Copper gasket

    part in stock 5 in stock

     852090 MG852090

    Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660

    £9.00

    INC VAT

    £7.50  EX VAT


    Exhaust Shim
    EXA91826 Fits V7 Cafe (2009), V7 Classic (2008-2012), Nevada 750 (2004-2013), Breva 750, V7 Racer (2011-2013), V7 Special (2012-2013), V7 Stone (2012-2013), V7 II ALL, V7 III ALL, V9 EURO4, V85TT 
    click to view full size

    Dimensions:
    38mm ID x 44mm OD x 26mm

    Exhaust gasket, silencer bush or muffler gasket shim for exhaust joint between silencer and downpipe

    2 exhaust bushes required per bike

    part in stock 2 in stock

     91113826 GU91113826 91 11 38 26
     9111 3826 9111.3826 91.11.38.26

    £15.00

    INC VAT

    £12.50  EX VAT


    V-Twin Boost Plug-In Fuelling Fixer Euro 4
    FUA85001 Fits V85TT (EURO4) 
    click to view full sizeclick to view full size

    The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
    Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

    The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
    Make your bike run as it should have done from the factory!

    • Quick and easy installation
    • Resistant to atmospheric agents and vibrations
    • Optimized by Mistral for your bike
    • Best response to the opening of the throttle
    • Better torque at low-medium range
    • Reduction of the on/off effect
    • Correct air/fuel ratio in all conditions with real-time modification
    See the installation guide for help installing this

    part in stock 1 in stock

    £115.00

    INC VAT

    £95.83  EX VAT


    Performance Velocity Stack
    ACA85901 Fits V85TT 
    click to view full sizeclick to view full size

    HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

    This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10433 and V-Twin Boost - ACA85001 or ACA85002.

    Customer Kev fitted this combo and called us the next day to say that his V85TT was transformed; the fluffy throttle response between 2k and 3k was gone and the engine pulled better. Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

    part in stock 1 in stock

    £140.00

    INC VAT

    £116.67  EX VAT


    Gasket Exhaust Manifold OE
    ENA85090 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT 
    click to view full size

    Exhaust gasket for standard downpipes

    Composite gasket, see ENA85091 for less expensive alternative

    this part is available by special order This part is available by special order, request a quote

     852090 MG852090

    Also fits Aprilia RSV4, Aprilia Tuono V4, Aprilia RS660

    £19.00

    INC VAT

    £15.83  EX VAT

    Page 1 of 4
    1  2  3  4