Shop headings: New Spares | Used Spares | Accessories | Brands
Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint
To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005
Availability varies on this part, check availability
14003240 GU14003240 14 00 32 40
1400 3240 1400.3240 14.00.32.40
£128.00
INC VAT
£106.67 EX VAT
Stainless steel braided hose oil pipes for head to crankcase connection. Replaces leak prone rubber pipes. Includes V shaped banjo.
Always replace crush washers (6 x SIA12200) when fitting new oil lines, you may also require three of our banjo bolts ENA95990
This part is due back in stock soon, call 01484 841395 to reserve yours
14153601 GU14153601 14 15 36 01
1415 3601 1415.3601 14.15.36.01
£58.00
INC VAT
£48.33 EX VAT
Piston ring set for cast iron 83mm bores
These must not be used with Nikasil bores
Sorry, this part is no longer available.
14060650-z 14060650 GU14060650 14 06 06 50
1406 0650 1406.0650 14.06.06.50
Sorry this item is out of production
Piston ring set for Nikasil 83mm bores
These can be used with cast iron bores
This part is due back in stock soon, call 01484 841395 to reserve yours
14060655-z 14060655 GU14060655 14 06 06 55
1406 0655 1406.0655 14.06.06.55
£36.00
INC VAT
£30.00 EX VAT
Dimensions:
Box measures 110mm x 70mm x 85mm, crankcase spigots measure 8mm OD and 17mm OD respectively
Crankcase breather tank / box in black. Also suitable for round barrelled specials where the standard airbox has been replaced with aftermarket filters
3 pipe connections on underside (large, medium and small diameters), plus connection for rocker cover breather pipes. Connects to ENA14157, ENA17700 and ENA95136
This part is due back in stock soon, call 01484 841395 to reserve yours
14155700-z 14155700 GU14155700 14 15 57 00
1415 5700 1415.5700 14.15.57.00
£61.75
INC VAT
£51.46 EX VAT
Tacho drive pinion
This part is available by special order, request a quote
14769200 GU14769200 14 76 92 00
1476 9200 1476.9200 14.76.92.00
£37.50
INC VAT
£31.25 EX VAT
Front main bearing flange
This part is available by special order, request a quote
14011900 GU14011900 14 01 19 00
1401 1900 1401.1900 14.01.19.00
£98.00
INC VAT
£81.67 EX VAT
Automatic cam chain tensioner
This cam chain tensioner is a worthwhile upgrade which should improve ignition and valve timing. Replaces Guzzi ref. 30057810
This part is due back in stock soon, call 01484 841395 to reserve yours
13058200-z 13058200 GU13058200 13 05 82 00
1305 8200 1305.8200 13.05.82.00
£36.00
INC VAT
£30.00 EX VAT
Screw in plastic dipstick for models with sump extension fitted. Uses O Ring ENA90706
base of flange to end measures 162mm
This part is due back in stock soon, call 01484 841395 to reserve yours
30004910-z 30004910 GU30004910 30 00 49 10
3000 4910 3000.4910 30.00.49.10
£10.20
INC VAT
£8.50 EX VAT
40mm exhaust valve
This part is available by special order, request a quote
28036160 GU28036160 28 03 61 60
2803 6160 2803.6160 28.03.61.60
£30.00
INC VAT
£25.00 EX VAT