High quality German made Mahle OE quality cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£9.25
INC VAT
£7.71 EX VAT
Condenser with mount bracket
2 required
More than 5 in stock
19708620 GU19708620 19 70 86 20
1970 8620 1970.8620 19.70.86.20
£7.30
INC VAT
£6.08 EX VAT
One metre of copper core HT lead, this is superior to the more commonly available carbon core lead
Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector
More than 5 in stock
£6.40
INC VAT
£5.33 EX VAT
Valve collet
8 required per engine
More than 5 in stock
12038100 GU12038100 12 03 81 00
1203 8100 1203.8100 12.03.81.00
£8.30
INC VAT
£6.92 EX VAT
Stainless steel braided hose oil lines for heads on square barrel models. See ENA14662 if you also need threaded link to cylinder head
Always replace crush washers (SIA12200 x 2 and SIA10900 x 2) when replacing oil lines, you may also require our banjo bolt ENA95990. Also known as Guzzi ref. 01153600 and 01153602
4 in stock
14153660 GU14153660 14 15 36 60
1415 3660 1415.3660 14.15.36.60
£53.00
INC VAT
£44.17 EX VAT
Final drive inner seal
For Breva 750 up to frame no. LL111907
More than 5 in stock
90407590-z 90407590 GU90407590 90 40 75 90
9040 7590 9040.7590 90.40.75.90
£9.00
INC VAT
£7.50 EX VAT
Large frame to engine crankcase breather pipe
3 in stock
28157450-z 28157450 GU28157450 28 15 74 50
2815 7450 2815.7450 28.15.74.50
£13.50
INC VAT
£11.25 EX VAT
14 sided oil filter tool for Mahle filter SIA15301. Also fits the latest 14 sided version of the oil filter fitted to late CARC models.
This tool is for models where the sump needs to be removed to get to the oil filter. Not suitable for Champion or UFI oil filters
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Dellorto 9.5g float with tang for needle valve. May come in black or white
Also known as Guzzi ref. 61934300, 27934315
2 in stock
19934380 GU19934380 19 93 43 80
1993 4380 1993.4380 19.93.43.80
£19.80
INC VAT
£16.50 EX VAT
Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders
Also known as Brembo ref. 110312720
5 in stock
19659500 GU19659500 19 65 95 00
1965 9500 1965.9500 19.65.95.00
£7.50
INC VAT
£6.25 EX VAT