Page 15 of 18
Sort by Title    | Sort by Price |
Fits Moto Guzzi S3, 850/1000 ALL Models, 1100 Sport, V11 Sport, V7 Sport, S3, Cali 1100 (1994-1997), Cali EV ALL, Bellagio, Breva 850, Breva 1100, Breva 1200, 1200 Sport (2v/cyl), Griso 850, Griso 1100, Norge 850, Norge 1200 (2v/cyl) 
Exhaust Stud Kit Stainless Steel
SSA96040 | £16.60 INC VAT£13.83 EX VAT |  | Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA17061 |  | quantityadd to basket
| Dimensions: M8 x 40mm studs More than 5 in stock 96508040-z 96508040 GU96508040 96 50 80 40
9650 8040 9650.8040 96.50.80.40 | | |
|
Fits Moto Guzzi 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV
Brake or Gear Pivot Bolt, Nut and Washer Kit Stainless Steel
SSA98660 | £16.10 INC VAT£13.42 EX VAT |  | M12 pivot bolt kit for brake and gear lever pivots on Tonti framed models. Kit consists of 1 M12 bolt (with hex head and slotted other end), wavy washer, flat washer and half nut Beautifully made to enhance the appearance of your bike, also cheaper than OE non stainless parts. Guzzi parts refs: 30252360, 98073660, 95100409, 92701120, 17252350. Does not fit G5 | | quantityadd to basket
| Dimensions: M12 5 in stock 98053660-z 98053660 GU98053660 98 05 36 60
9805 3660 9805.3660 98.05.36.60 | | |
|
Fits Moto Guzzi 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV (1997-2002), 1100 Sport ALL, Daytona ALL, Centauro, V11 Sport (1999-2001), V7 Sport, V7 700, V7 Special (1969-1971), 850GT
Bevel Box Output Seal
TRA90085 | £12.20 INC VAT£10.17 EX VAT |  | Output oil seal for drive box This oil seal fits output side of bevel box | | quantityadd to basket
| Dimensions: 70mm x 85mm x 8mm More than 5 in stock 90407085-z 90407085 GU90407085 90 40 70 85
9040 7085 9040.7085 90.40.70.85 | | |
|
Fits Moto Guzzi Breva 750, Nevada 750, Strada 750, 750T, Nevada ALL, Lario, V7 Classic, V7 Racer, V7 Special, V9 Roamer, V9 Bobber, V7 Cafe (2008-2016), V7 II Racer, V7 II Special, V7 II Stone, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Cali 2, Spada ALL, T4, T5, G5 (cast wheel), Mille GT (cast wheel), Cali 3 (cast wheel), Strada 1000 (cast wheel), Convert (cast wheel), 1000S (cast wheel), 750 Targa, Strada 750
Wheel Bearing Front
WHA92221 | £10.80 INC VAT£9.00 EX VAT |  | Front wheel bearing, sealed 2 bearings required per wheel | | quantityadd to basket
| Dimensions: 42mm OD More than 5 in stock 92204221-z 92204221 GU92204221 92 20 42 21
9220 4221 9220.4221 92.20.42.21 | | |
|
Fits Moto Guzzi 1100 Sport ALL, Cali 2, T3, 750S, S3, 850T, T4, T5 (Series 1), G5, 1000 SP, SP II, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT (Series 1), Quota ALL, V11 Sport, Cali 1100 (1994-1997), Cali EV
Seal Kit Full Engine and Gearbox
ENA17550 | £45.00 INC VAT£37.50 EX VAT | | Full engine and gearbox seal kit, includes all necessary seals for a complete engine and gearbox overhaul. Full gasket sets also available. Can also be fitted to models equipped with a Saprisa charging system if front crank oil seal ENA94238 is ordered | | quantityadd to basket
| More than 5 in stock 17999550 GU17999550 17 99 95 50
1799 9550 1799.9550 17.99.95.50 | | |
|
Fits Moto Guzzi 1100 Sport ALL, Cali 2, T3, 750S, S3, 850T, T4, T5 (Series 1), G5, 1000 SP, SP II, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT (Series 1), Quota ALL, V11 Sport, Cali 1100 (1994-1997), Cali EV
Seal Kit Full Engine and Gearbox
ENA17550 | £45.00 INC VAT£37.50 EX VAT | | Full engine and gearbox seal kit, includes all necessary seals for a complete engine and gearbox overhaul. Full gasket sets also available. Can also be fitted to models equipped with a Saprisa charging system if front crank oil seal ENA94238 is ordered | | quantityadd to basket
| More than 5 in stock 17999550 GU17999550 17 99 95 50
1799 9550 1799.9550 17.99.95.50 | | |
|
Fits Moto Guzzi V7 Sport, V7 700, V7 Special (1969-1971), 850 GT, Cali Vintage, Cali Classic Touring, 850/1000 ALL Models, Cali 1100, Cali EV, 1100 Sport ALL, Daytona ALL, Centauro, V9 ALL, V85TT
Oil Seal
TRA90850 | £9.80 INC VAT£8.17 EX VAT |  | Rotational oil seal for crownwheel carrier in drive box on post 1974 big twins. Front crank oil seal on loop frame models Also known as Guzzi ref. 90403850 and used on 850 GT and loop frame models for front crank oil seal ( 90403851 ) | | quantityadd to basket
| Dimensions: 38mm x 50 mm x 7mm More than 5 in stock 90413850 GU90413850 90 41 38 50
9041 3850 9041.3850 90.41.38.50 | | |
|
Fits Moto Guzzi V35 I, V35 II, V35 3 (pre 1989), V35C, Imola, Imola 2, V50 I, V50 II, V50 3, V50C, Monza, Monza 2 (pre 1989), V65, Lario, V65 Florida (pre 1989), V35 Florida (pre 1989)
Oil Filter UFI 2546500
SIA19530 | £8.00 INC VAT£6.67 EX VAT |  | UFI 25 46 500 cartridge oil filter For post 1989 V35, V50 and V65 models use SIA27300 .
NB Packaging may vary. For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer) | | quantityadd to basket
| Dimensions: 105mm x 45mm diameter overall More than 5 in stock 19153000 GU19153000 19 15 30 00
1915 3000 1915.3000 19.15.30.00 | | |
|
Fits Moto Guzzi Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa
Brake Light Switch Fine Thread
ELA07116 | £21.40 INC VAT£17.83 EX VAT |  | Fine thread screw in brakelight switch for linked system proportioning valve or splitter Also known as Guzzi ref. 63657000 | | quantityadd to basket
| Dimensions: M10 fine thread 4 in stock 79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16 | | |
| Also fits Ducati 350-500 Twin,
Ducati 350-500 Twin GTV,
Ducati 350-500 Twin Sport,
Ducati 500 SL Pantah,
Ducati 500 Sport Desmo,
Ducati 600 SL Pantah,
Ducati 750 GT/Sport Köwe,
Ducati 750 Paso (1984-1992),
Ducati 750 Sport, Ducati 750/900 SS Köwe,
Ducati 750 F1/Laguna Seca,
Ducati 860/900 GTS,
Ducati 900 Darmah,
Ducati 900 MHR-I,
Ducati 900 SS (1990),
Ducati 906 Paso (1988),
Ducati 1000 MHR-2/S2 | |
Fits Moto Guzzi G5, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, Mille GT, 1000 SP, T3, T4, V7 Sport, 750S, S3, 850T, Monza
Footpeg rubber
FRA55443 | £9.50 INC VAT£7.92 EX VAT |  | Footrest rubber, lattice patterned Used for pillion and / or riders footrest depending on model. NB some T3 models use FRA14443 for pillion footrest rubber, check your bike before ordering | | quantityadd to basket
| Dimensions: 38mm diameter x 97mm x 20mm ID More than 5 in stock 14443200-z 14443200 GU14443200 14 44 32 00
1444 3200 1444.3200 14.44.32.00 | | |
|
Page 15 of 18
|
Secure online shopping with SagePay 
