The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 19 of 21

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Battery Tray Rubber

FRA14701 Fits Convert, G5, Le Mans 1, Le Mans 2, Nevada 750 (1991-1993), Nevada 750 (2002-2003), S3, T3, T4, 1000 SP, V35 ALL, V50 ALL, V65, V65 Florida, V7 Sport

Dimensions:
140mm x 245mm x 20mm

Black rubber battery mat

This is the larger battery tray fitted to Tonti framed models

part in stock 3 in stock

14707000 GU14707000 14 70 70 00
1470 7000 1470.7000 14.70.70.00

£12.20

INC VAT

£10.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Bevel Box Output Seal

TRA90085 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV (1997-2002), 1100 Sport ALL, Daytona ALL, Centauro, V11 Sport (1999-2001), V7 Sport, V7 700, V7 Special (1969-1971), 850GT

Dimensions:
70mm x 85mm x 8mm

Output oil seal for drive box

This oil seal fits output side of bevel box

part in stock More than 5 in stock

90407085-z 90407085 GU90407085 90 40 70 85
9040 7085 9040.7085 90.40.70.85

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Fine Thread

ELA07116 Fits Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa

Dimensions:
M10 fine thread

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

part in stock More than 5 in stock

79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport K�we, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS K�we, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

£21.40

INC VAT

£17.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Battery Tray Rubber

FRA14701 Fits Convert, G5, Le Mans 1, Le Mans 2, Nevada 750 (1991-1993), Nevada 750 (2002-2003), S3, T3, T4, 1000 SP, V35 ALL, V50 ALL, V65, V65 Florida, V7 Sport

Dimensions:
140mm x 245mm x 20mm

Black rubber battery mat

This is the larger battery tray fitted to Tonti framed models

part in stock 3 in stock

14707000 GU14707000 14 70 70 00
1470 7000 1470.7000 14.70.70.00

£12.20

INC VAT

£10.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Friction Plate New Type

CLA05430 Fits 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, Spada 3, Strada 1000, V11 Sport, Le Mans 1000 (from engine VV016375), Mille GT (from engine VT024596), Cali 3 (from engine VT032542),, Daytona, Centauro, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl), Jackal

New type clutch friction plate for models with deep splines with deep splined centre

2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)

These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510

part in stock More than 5 in stock

05084430 GU05084430 05 08 44 30
0508 4430 0508.4430 05.08.44.30

£57.70

INC VAT

£48.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal Bevel Box Output

TRA90591 Fits Breva 750 (2005-2007), V7 Classic, V7 Racer, V7 Cafe, Nevada 750 (2002-2016), V7 II ALL, V7 III ALL

Dimensions:
95mm OD

Final drive inner output seal

For Breva 750 from frame no. LL111908

part in stock 4 in stock

90407591-z 90407591 GU90407591 90 40 75 91
9040 7591 9040.7591 90.40.75.91

£15.80

INC VAT

£13.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Petrol Tap Original Type

TAA14400 Fits V7 Sport, Le Mans 1, 750S, S3

Dimensions:
M16 x 1 threaded section, 8mm fuel pipe spigot

Manual square bodied fuel tap with nut, washer and filter. Fits left or right hand side of tank.

Off, on and reserve positions. Approved for use with fuel containing ethanol.

part in stock 2 in stock

14105400-z 14105400 GU14105400 14 10 54 00
1410 5400 1410.5400 14.10.54.00

£40.00

INC VAT

£33.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Air Filter

SIA10424 Fits Breva 750, V7 Classic (2008-2012), Nevada 750 (2004-2012), V7 Racer (2010-2012), V7 Cafe,

Dimensions:
115mm x 155mm x 28mm

Air filter, flat paper cartridge type

See SIA10425 for a reusable performance air filter

part in stock More than 5 in stock

AP8104242

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Bevel Box Pinion Bearing

TRA92249 Fits 850/1000 ALL Models, Quota ALL, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Cali Vintage, Cali EV, Daytona ALL, Centauro, V7 Cafe, V7 Stone (2012-), V7 Special (2012-)

Dimensions:
52mm OD

Pinion roller bearing for drive box

part in stock 1 in stock

92249227-z 92249227 GU92249227 92 24 92 27
9224 9227 9224.9227 92.24.92.27

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Regulator Recifier Saprisa

ELA28800 Fits V65 GT, 750T, Strada 750, 750 Targa, Nevada 750 (1991-2001), NTX 350, NTX 650, V35 3, Cali 2, Spada 3, Cali 3, V65 Florida, 1000S, Mille GT

Dimensions:
90mm mounting centres

Regulator rectifier for Saprisa charging systems

Male spade connectors on regulator, may be supplied with 7 connectors - see the diagram on our technical documents page for help installing this part.

part in stock 1 in stock

28703800-z 28703800 GU28703800 28 70 38 00
2870 3800 2870.3800 28.70.38.00

£85.00

INC VAT

£70.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 19 of 21

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21