Original type clutch friction plate for big twins
2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub. Also known as Guzzi ref. 12084400
4 in stock
28084460-z 28084460 GU28084460 28 08 44 60
2808 4460 2808.4460 28.08.44.60
£52.00
INC VAT
£43.33 EX VAT
Stainless steel braided hose oil lines for heads on square barrel models. See ENA14662 if you also need threaded link to cylinder head
Always replace crush washers (SIA12200 x 2 and SIA10900 x 2) when replacing oil lines, you may also require our banjo bolt ENA95990. Also known as Guzzi ref. 01153600 and 01153602
4 in stock
14153660 GU14153660 14 15 36 60
1415 3660 1415.3660 14.15.36.60
£53.00
INC VAT
£44.17 EX VAT
14 sided oil filter tool for Mahle filter SIA15301. Also fits the latest 14 sided version of the oil filter fitted to late CARC models.
This tool is for models where the sump needs to be removed to get to the oil filter. Not suitable for Champion or UFI oil filters
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Splined tool for aligning clutch plates on reassembly, without this clutch alignment tool you risk damaging the intermediate plate. The tool screws into the back of the crankshaft to compress the clutch springs and align the clutch friction plates
Suitable only for later clutch centre spline type (e.g. clutch plate CLA05430). As used by the Gutsibits spanner monkeys on their bikes
1 in stock
30906510 GU30906510 30 90 65 10
3090 6510 3090.6510 30.90.65.10
£110.00
INC VAT
£91.67 EX VAT
Riders footpeg rubber, black with chamfered underside
4 in stock
28443201-z 28443201 GU28443201 28 44 32 01
2844 3201 2844.3201 28.44.32.01
£7.60
INC VAT
£6.33 EX VAT
Large frame to engine crankcase breather pipe
3 in stock
28157450-z 28157450 GU28157450 28 15 74 50
2815 7450 2815.7450 28.15.74.50
£13.50
INC VAT
£11.25 EX VAT
Heavy duty spring used for centrestand and sidestand applications
More than 5 in stock
12434001-z 12434001 GU12434001 12 43 40 01
1243 4001 1243.4001 12.43.40.01
£9.00
INC VAT
£7.50 EX VAT
The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.
The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!
This part is due back in stock soon, call 01484 841395 to reserve yours
£129.00
INC VAT
£107.50 EX VAT
Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK BP6ES spark plugs, 2 x sump gaskets, 2 x rocker cover gaskets and all crush washers to complete a service on your bike.
Save time and hassle by ordering service oil kit OIA14000 with your service kit
Save £'s by buying everything in a service kit
For models with points see SIA18001. Oils and lubricants available separately. The oils you need are 1 x OIA11036 and 1 x OIA08194
More than 5 in stock
£42.00
INC VAT
£35.00 EX VAT
Full service kit for pre PI engine EV models containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK BPR6ES spark plugs, 1 x sump gasket, 2 x rocker cover gaskets, O ring and all crush washers to complete a service on your bike
Save £'s by buying everything in a service kit
See FUA29106 for fuel filter, ENA95006 for gauze oil filter tab washer. Oils and lubricants available separately. The oils you need are 1 x OIA01152 and 1 x OIA08194 or save time and money by ordering service oil kit OIA18004 with your service kit.
1 in stock
£42.00
INC VAT
£35.00 EX VAT