New type clutch friction plate for models with deep splines with deep splined centre
2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)
These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510
4 in stock
05084430 GU05084430 05 08 44 30
0508 4430 0508.4430 05.08.44.30
£57.70
INC VAT
£48.08 EX VAT
New type clutch friction plate for models with deep splines with deep splined centre
2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)
These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510
4 in stock
05084430 GU05084430 05 08 44 30
0508 4430 0508.4430 05.08.44.30
£57.70
INC VAT
£48.08 EX VAT
Pair of EBC FA181TT rear brake pads
Also known as Guzzi ref. 30654626
More than 5 in stock
05654630-z 05654630 GU05654630 05 65 46 30
0565 4630 0565.4630 05.65.46.30
Also fits Royal Enfield Himalayan (Front)
£19.50
INC VAT
£16.25 EX VAT
Pair of ignition points (made up of Guzzi part numbers 14715429 and 14715430)
More than 5 in stock
14719800 GU14719800 14 71 98 00
1471 9800 1471.9800 14.71.98.00
£29.50
INC VAT
£24.58 EX VAT
Oil pressure sender
Can also be used in place of oil pressure switch 17768750 and adapter 19055800 on Monza (check which type your small twin uses before replacing). Replaces two part sensor 31999581.
See ENA12640 for replacement crush washer if required
5 in stock
19768720-z 19768720 GU19768720 19 76 87 20
1976 8720 1976.8720 19.76.87.20
£15.50
INC VAT
£12.92 EX VAT
Dimensions:
M12 x 1 thread, 32mm height from top of thread
Oil pressure switch. May be supplied with a vertical spade connector, this supercedes the original Guzzi part which is no longer available. This version will fit without removal of the alternator
See ENA12640 for replacement crush washer and ELA10005 for female spade connector
5 in stock
31768780 GU31768780 31 76 87 80
3176 8780 3176.8780 31.76.87.80
£11.00
INC VAT
£9.17 EX VAT
Dimensions:
M12 thread, 46mm x 21mm bolt flats
Oil pressure sender, M12 thread, male bullet connector
Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.
See ENA12640 for replacement crush washer if required
More than 5 in stock
17768750 GU17768750 17 76 87 50
1776 8750 1776.8750 17.76.87.50
£10.00
INC VAT
£8.33 EX VAT
Taper needle roller bearing used as steering head bearing
2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake
More than 5 in stock
92249225 GU92249225 92 24 92 25
9224 9225 9224.9225 92.24.92.25
£20.50
INC VAT
£17.08 EX VAT
Pair of EBC FA181TT rear brake pads
Also known as Guzzi ref. 30654626
More than 5 in stock
05654630-z 05654630 GU05654630 05 65 46 30
0565 4630 0565.4630 05.65.46.30
Also fits Royal Enfield Himalayan (Front)
£19.50
INC VAT
£16.25 EX VAT
Pair of sturdy black handguard extensions, manufactured in the UK. These should save your levers from expensive damage in the unfortunate event of your bike falling over or being dropped and offer superior weather protection for year round riding
Compatible with the original factory handlebars. Easily installed. A brace to the mirror perch ensures that these are stable at speed.
1 in stock
£68.00
INC VAT
£56.67 EX VAT
Secure online shopping 
