UFI 25 46 500 cartridge oil filter. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick

For post 1989 V35, V50 and V65 models use SIA27300 .
NB Packaging may vary. For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer)

 More than 5 in stock

 19153000 GU19153000 19 15 30 00
 1915 3000 1915.3000 19.15.30.00

Head Gasket

 5 in stock

 30022060 GU30022060 30 02 20 60
 3002 2060 3002.2060 30.02.20.60

**SALE** Save £50 on these fork dampers!

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 1 in stock

 28526440 GU28526440 28 52 64 40
 2852 6440 2852.6440 28.52.64.40

Clutch cable

We advise you to measure your existing cable before ordering in case you have a non standard set up

 1 in stock

2B001202

Steel fixed front right brake pipe with threaded connectors at each end

Rigid brake pipe

 1 in stock

 17658050 GU17658050 17 65 80 50
 1765 8050 1765.8050 17.65.80.50

Ducati type alternator stator

300W output, doesn't include rotor / magnet. Also known as Guzzi ref. 30712460

 1 in stock

 37712405 GU37712405 37 71 24 05
 3771 2405 3771.2405 37.71.24.05

Performance 2-1 connecting pipe, de-CAT or H pipe. This mid pipe is 2kg lighter than the original pipe and will make a significant improvement to both the exhaust note and performance of your V85 TT when combined with a performance silencer and air filter SIA10433. We also recommend fitting a V-Twin Boost plug-in FUA85001 with this CAT eliminator to enrich the mixture

• Y piece made from AISI304 stainless steel
• Installation with graphite bushings to limit the transmission of vibrations
• Fixing bracket with antivibration silent block
• Straight through design for better performance and deeper sound
• Larger diameter internals for better exhaust gas flow
• This crossover is compatible with original system components
• Reduces engine operating temperature for better fuel consumption and efficiency
• Includes exhaust bushes
• Modern satin finish
• Manufactured on the shores of Lake Como and developed using a rolling road

 1 in stock

Inner tube for 16 inch wheel

 2 in stock

Light weight and easy to fit, this radiator grill will protect your expensive radiator from flying stones and debris. Includes anti vibration rubbers to prevent damage to front brake lines Manufactured from black finished aluminium and designed to offer stylish protection for your expensive radiator whilst also affording your motorcycle a more refined look. Comprehensive fitting instructions included along with any additional fittings which may be required. No modification to your motorcycle is necessary.

Radiator cover made in Italy. See this video for installation instructions.
NB ice grey version shown in pictures

 1 in stock

Pair of engine crash bars for V7 models (including single throttle body models) finished in tough satin black . The heads and rocker covers are vulnerable on these bikes and can be badly damaged by even a minor accident, replacement cost can be more than £1000 so protect your bike with these bars.

Supplied with fitting hardware, this crashbar has been specially developed for the later V7 head design. Engine bars - essential protection for your bike.

 1 in stock