High security ABUS alarmed disc lock.

What’s better than a secure lock? A secure lock with an alarm function.
As soon as you have activated the alarm tone on your lock, your lock is armed. If the lock experiences prolonged vibration, it will emit a 100 dB loud alarm signal. If you ever want to use your lock without the alarm function, a 5mm locking bolt made of specially hardened steel will secure your motorbike.
The ABUS “push down” cylinder is easy to operate and locks the bolt automatically.

In case you ever misplace the key, three keys are included in the scope of delivery. A CR2 battery is also included in the scope of delivery so that nothing stands in the way of immediate use.

 Order now and we will post your order within 7 days.

275

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For round barrel 850 and 1000 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations, these protectors are exclusive to Gutsibits

 This part is due back in stock soon, call 01484 841395 to reserve yours

Complete reproduction Brembo P2 F05 (P5) front right hand brake caliper for small twins (when mounted behind fork leg)

Supplied without brake pads, see BRA19724 if you require these. Also known as Guzzi ref. 19652336

 Availability varies on this part, check availability

 82037800 GU82037800 82 03 78 00
 8203 7800 8203.7800 82.03.78.00

Also fits Benelli 250 TS

Bright finish CAT eliminator crossover and downpipe assembly. Fit for increased power and torque through the rev range.

Peak power increase of 4hp at 9000 RPM and torque increase of 5lb-ft at 3500rpm. Reduced weight and heat for improved comfort in summer. No remapping required, compatible with factory centre stand.

 This part is available by special order, request a quote

Performance 2-1 connecting pipe or H pipe. This mid pipe is less than half the weight of the original pipe and will make a significant improvement to both the exhaust note and performance of your V85 TT when combined with a performance silencer and air filter SIA10433

Gaskets not required with this crossover, the Y piece fits direct. A performance exhaust crossover for your V85 TT

 This part is available by special order, request a quote

Pair of high quality performance silencers finished in black. Made from stainless steel these silencers are both stylish and durable, a stainless steel end cap compliments the black of the middle section of this conical silencer. A removable baffle allows you to choose your volume level.

Standard exhaust shims / gaskets not required when fitting these silencers.

Developed in Mandello by performance experts Agostini

 This part is available by special order, request a quote

1 metre of Ariete fuel pipe suitable for fuel and breather pipe applications on gravity fed non injection models, cut your fuel lines to your own spec

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004

 More than 5 in stock

Pair of chromed Tommaselli handlebars, low rise

Also known as Guzzi ref. 30600310, 65600300, 17600360

 2 in stock

 30600310 GU30600310 30 60 03 10
 3060 0310 3060.0310 30.60.03.10

Pair of sintered EBC FA256 HH rear brake pads

High performance sintered pads with twin pin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248

 1 in stock

AP8133798

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   This part is due back in stock soon, call 01484 841395 to reserve yours

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]