Rocker cover screw kit containing 12 replacement stainless steel socket cap bolts for two valve small twin rocker covers. Only one kit required per engine. Only for twin throttle body V7 models

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted. This kit contains the correct screws for the Breva 750 and 2004 on V7 models but does not include the two flanged M5 screws SSA81523 that fasten the rocker cover covers to the rocker cover (on models other than the V7 Racer)

 More than 5 in stock

1 litre of semi-synthetic Eni I-Ride Moto 10w30. Eni i-Ride moto 10W-30 is a synthetic technology lubricant, designed for the latest four-stroke motorcycle engines. It is a product of superior quality expressly formulated to meet high performance levels.

Eni i-Ride moto 10W-30 can withstand high stresses to which also multi-valves motorcycles are submitted.

The product guarantees high protection both in motorways and in urban areas.

The formulation of Eni i-Ride moto 10W-30 allows to ensure perfect lubrication of the engine, both at low and high temperatures.

The perfect balance between the additives used allows maximum protection and engine life, optimizing clutch and gear performance.

Surpasses API SL, JASO MA and MA2. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of fully synthetic Eni I-Ride Scooter 10W-40. Eni i-Ride scooter 10W-40 is a synthetic technology lubricant designed to lubricate 4-stroke engines fitted in scooters. Its formulation makes it suitable for use in engines cooled either with coolant or air.

The excellent features of this product make it suitable for use in the most stressed motors, also equipped with Start & Stop systems.

The special formulation of Eni i-Ride scooter 10W-40 is able to ensure, due to the excellent lubrication, the best engine protection in all operating conditions, even the most extreme ones.

The formulation of Eni i-Ride scooter 10W-40 is developed to perform an effective control of deposits formation.

The components present in the formulation have been carefully selected to maintain their properties even under operating conditions characterized by high temperatures.

Surpasses API SJ, JASO MA and MA2. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of ENI I-Ride Moto 10W-40. Eni i-Ride Moto 10W-40 is a semi-synthetic lubricant formulated with high quality bases designed for 4-stroke engines of the latest generation.

Eni i-Ride moto 10W-40 is a superior quality product specifically designed to meet the highest performance levels.

The semi synthetic additivation of Eni i-Ride moto 10W-40 is able to ensure perfect lubrication of the engine in any driving condition.

The perfect balance between the additives used in the formulation ensures maximum protection and engine life, optimizing clutch and gear performance.

Surpasses API SL, JASO MA and MA2. ENI oils were previously sold under the AGIP name

 1 in stock

1 litre of fully synthetic Eni I-Ride Racing 2T. Eni i-Ride Racing 2T is a top synthetic lubricant, specifically developed for 2 stroke motorcycle engines. Its excellent performances make it suitable to the most stressed 2 stroke engines, either air or liquid cooled.

The peculiar formulation of Eni i-Ride racing 2T guarantees the best engine protection, reducing wear and deposits formation even in the most extreme driving conditions.

The product is formulated with innovative additives to ensure high efficiency for a long service time of catalyst exhaust systems.

Eni i-Ride racing 2T reduces exhaust smoke and the formation of deposits inside exhaust system, ensuring the original performances to the engine.

Surpasses JASO FC/FD, ISO-L-EGD, HUSQVARNA approvals. ENI oils were previously sold under the AGIP name

 4 in stock

Sump bolt kit containing all replacement stainless steel socket cap bolts

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

 More than 5 in stock

Bolt kit containing 32 replacement stainless steel socket cap bolts for timing cover, inlet manifolds, alternator cover and sump pan. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). See SSA08090 for stainless sump bolt. See SSA08090 for sump bolt

Add a bit of sparkle to your small twin!

 More than 5 in stock

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.

See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.

 More than 5 in stock

1 litre of Millers ATF, used for fork lubrication and as hydraulic fluid for auto drive on Convert

1.7l required for Convert torque converter circuit (oil change due every 18000 miles). 80ml required per side for fork lubrication on big twins equipped with cartridge fork dampers (e.g. Le Mans 2, T3, 1000 SP etc...), 70ml for required per side for fork lubrication on small twins and Cali 1100 equipped with cartridge fork dampers (e.g. V50 II, V35 etc...)
OIA02075 can be used as a substitute for ATF in fork rebuilds.
Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock

1 litre of Eni I-Ride Scooter 15W-50. Eni i-Ride scooter 15W-50 is a high quality mineral based lubricant designed for 4-stroke scooters. Suitable for both liquid and air cooled engines, its formulation is developed to provide maximum performance even in the most severe operating conditions.

The excellent features of this product make it suitable for use in the most stressed motors, also equipped with Start & Stop systems.

The special formulation of Eni i-Ride scooter 15W-50 is able to ensure, due to the excellent lubrication, the best engine protection in all operating conditions, even the most extreme ones.

The formulation of Eni i-Ride scooter 15W-50 is developed to perform an effective control of deposits formation.

The components present in the formulation have been carefully selected to maintain their properties even under operating conditions characterized by high temperatures.

Surpasses API SJ, JASO MA and MA2 . ENI oils were previously sold under the AGIP name

 More than 5 in stock