Pair of Italian made stainless steel downpipes in a durable black finish

Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900

 This part is available by special order, request a quote

Flywheel, originally intended for dual point and Motoplat ignitions

2-33° of ignition advance. Supercedes V7 loop frame flywheel 12067000 . Weighs 4.2kg

 This part is available by special order, request a quote

 17067050 GU17067050 17 06 70 50
 1706 7050 1706.7050 17.06.70.50

Rocker cover for square barrel models. Finish may vary from your original cover so we recommend buying a pair of these

Supercedes Guzzi ref. 03023530

 This part is available by special order, request a quote

 883936 MG883936

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA18961

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 1 in stock

14526455-z 14526455 GU14526455 14 52 64 55
 1452 6455 1452.6455 14.52.64.55

Also fits Benelli Sei 900

Black 40 litre Junior top box / top case to to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. This case will take a single helmet

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

These are a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This will latch to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA14601

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. These are made for the thinner wall stanchions used on the Le Mans 1. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

1452640*

Factory upgraded oil pump with 16mm wide teeth as fitted to later big twins. Gives increased flow and can be retro fitted to earlier 850/1000 models which originally had 14mm teeth pumps

 This part is available by special order, request a quote

 30146400 GU30146400 30 14 64 00
 3014 6400 3014.6400 30.14.64.00

Black 55 litre Junior top box / top case to match Hepco and Becker Junior panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part

 This part is due back in stock soon, call 01484 841395 to reserve yours

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Front Brembo type brake disc, 6 mounting holes. Not drilled. High quality Italian made part

Also known as Guzzi ref. 14613350. Minimum thickness for these cast brake discs is 5.8mm. Always fit new brake pads when replacing a brake disc - see BRA54724. These discs may have oily manufacturing residues on the surface, this should be cleaned off using a cleaning alcohol or brake cleaner before fitting. New pads and discs should be bedded in using normal bedding in procedures. Needs 6 brake disc bolts BRA99499

 This part is due back in stock soon, call 01484 841395 to reserve yours

 28613345 GU28613345 28 61 33 45
 2861 3345 2861.3345 28.61.33.45

Also fits Benelli Sei