Shop headings: New Spares | Used Spares | Accessories | Brands
The SW-Motech mirror extender kit contains a pair of black mirror extensions that allow you to move your existing mirrors out and up by up to 4cm.
To ensure that your own shoulders aren't the only thing you see in the rear-view mirror, the extensions provide a significantly improved field of vision by relocating the mirrors to the outside. Once adjusted and screwed on, the sturdy, well-designed extensions provide secure hold for the mirrors, even when riding off-road or at high speeds.
See this link for fitting instructions.
1 in stock
£53.00
INC VAT
£44.17 EX VAT
Pair of chrome tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads
This part is due back in stock soon, call 01484 841395 to reserve yours
£53.00
INC VAT
£44.17 EX VAT
Driveplate retaining circlip
This part is available by special order, request a quote
14335303 GU14335303 14 33 53 03
1433 5303 1433.5303 14.33.53.03
£52.50
INC VAT
£43.75 EX VAT
Long alloy bellmouth / trumpet intake with domed mesh for Dellorto PHF 30 and 36 carbs, screws to rear of carb replacing air filter
2 in stock
£52.00
INC VAT
£43.33 EX VAT
Complete clutch lever and clamp assembly with M10 mirror mount and clutch cable adjuster. Black clamp, bright alloy lever. Same clamp as Guzzi ref. 2B001300
Also known as Guzzi ref. 30605510, 30605560. Can be used on 850/1000, V35, V50 and V65 models to achieve a lighter clutch with a wider range of engagement and improved adjustment. Reduces reach to the lever by 10mm compared to the standard lever clamp on these models
This part is available by special order, request a quote
32605510 GU32605510 32 60 55 10
3260 5510 3260.5510 32.60.55.10
Also fits Aprilia Pegaso 650 2005, Aprilia Pegaso 650 Strada (2004-)
£52.00
INC VAT
£43.33 EX VAT
Original type clutch friction plate for big twins
2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub. Also known as Guzzi ref. 12084400
This part is due back in stock soon, call 01484 841395 to reserve yours
28084460-z 28084460 GU28084460 28 08 44 60
2808 4460 2808.4460 28.08.44.60
£52.00
INC VAT
£43.33 EX VAT
Right hand Domino type starter switch for use with separate throttle, e.g. Tommaselli twin pull throttles ACA10500 or ACA10501
On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. If replacing 'Lego' type switchgear (e.g. Le Mans 2, V50) with integrated twistgrip you will need a separate twistgrip, see ACA10500 and ACA10501. Packaging may include explanation of switchgear wire covers. This type originally fitted as standard to the early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear.. Molex connectors available separately.
1 in stock
01738800 GU01738800 01 73 88 00
0173 8800 0173.8800 01.73.88.00
£51.00
INC VAT
£42.50 EX VAT
Complete gasket kit
This is only a gasket set, it does not include oil seals and O rings. The top end O rings required are 12x ENA97624 and 2 x ENA90203
1 in stock
30999060-z 30999060 GU30999060 30 99 90 60
3099 9060 3099.9060 30.99.90.60
£51.00
INC VAT
£42.50 EX VAT
Complete gasket kit for all square barrel 1000 models
This is only a gasket set, it does not include oil seals and O rings. The top end O rings required are 12x ENA97624 and 2 x ENA90203
This part is due back in stock soon, call 01484 841395 to reserve yours
29999000-z 29999000 GU29999000 29 99 90 00
2999 9000 2999.9000 29.99.90.00
£51.00
INC VAT
£42.50 EX VAT
Ball bearing for drive box output side
Order now and we will post your order within 7 days.
92201070 GU92201070 92 20 10 70
9220 1070 9220.1070 92.20.10.70
£50.70
INC VAT
£42.25 EX VAT