Ducati regulator rectifier for models fitted with the Ducati charging system

Connections: 2 x yellow male bullet, 1 x white female bullet, 1 x black male bullet, 1 x red male bullet. See ELA28739 for a less expensive alternative

 This part is due back in stock soon, call 01484 841395 to reserve yours

37703805-z 37703805 GU37703805 37 70 38 05
 3770 3805 3770.3805 37.70.38.05

Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs

Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Replaces Guzzi ref. 2952360 and 29526460. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)

 This part is available by special order, request a quote

 29525360 GU29525360 29 52 53 60
 2952 5360 2952.5360 29.52.53.60

Black 55 litre Junior top box / top case to match Hepco and Becker Junior Flash panniers. This is the classic Hepco and Becker top box design. Sized to take two helmets

• Silver painted covers can be removed for colour matching to your bike
• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Racks and accessories available separately

This is a great value top case which are quickly and securely fitted to any Moto Guzzi. The discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with two keys. See LUA70127 for a Guzzi badge to fit these panniers. This latches to any Hepco or Guzzi rack with a oblong section at the rear, e.g. LUA61051

 This part is available by special order, request a quote

Kit of bearings required for gearbox overhaul on five speed big twins. Contains bearings for both ends of all three gearbox shafts, clutch release bearing and mainshaft thrust bearing. You may also need selector drum shims GEA55000, GEA55001, GEA55002, GEA55003 or mainshaft shim GEA11050

Saves more than £20 compared to buying the bearings separately. See GEA14000 for gasket and seal kit.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Complete 12v 300w alternator for Saprisa charging systems

No longer in production

 Sorry, this part is no longer available.

 28712400 GU28712400 28 71 24 00
 2871 2400 2871.2400 28.71.24.00

Pair of Italian made stainless steel downpipes in a durable black finish

Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900

 This part is available by special order, request a quote

Tall headstock Tonti Frame and V5 document

Sold without lower frame rails

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

Digiplex 2S ignition unit or ECU

Digiplex MED 500A, this is the smaller of the two types of ECU fitted to Cali 1100 models. For 92mm bore models with KC and KD engine prefixes

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

 30721460 GU30721460 30 72 14 60
 3072 1460 3072.1460 30.72.14.60

Flywheel, originally intended for dual point and Motoplat ignitions

2-33° of ignition advance. Supercedes V7 loop frame flywheel 12067000 . Weighs 4.2kg

 This part is available by special order, request a quote

 17067050 GU17067050 17 06 70 50
 1706 7050 1706.7050 17.06.70.50

Rocker cover for square barrel models. Finish may vary from your original cover so we recommend buying a pair of these

Supercedes Guzzi ref. 03023530

 This part is available by special order, request a quote

 883936 MG883936