Set of clutch plates

Consists of 6 coated friction plates and 5 intermediate metal plates

 This part is available by special order, request a quote

 18082350 GU18082350 18 08 23 50
 1808 2350 1808.2350 18.08.23.50

Rocker cover for round barrel models, please specify left or right when ordering (Guzzi ref. 17023550 or 17023560)

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

 17023560 GU17023560 17 02 35 60
 1702 3560 1702.3560 17.02.35.60

Starter ring gear

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 3 in stock, request a quote

 17067900 GU17067900 17 06 79 00
 1706 7900 1706.7900 17.06.79.00

Rectifier / diode board for Bosch charging systems. High quaility replacement part sourced from Germany

See our Bosch fault finder page for help diagnosing problems on your Bosch charging system.

 This part is due back in stock soon, call 01484 841395 to reserve yours

17704300-z 17704300 GU17704300 17 70 43 00
 1770 4300 1770.4300 17.70.43.00

Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 Sorry, this part is no longer available.

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Black steel centre stand without springs or brackets

Although this will also fit T3, T4, Convert, G5 etc... it is intended for models with upswept silencers and will not fully retract on models such as the T3. Brackets, bushes and springs available separately

 Sorry, this part is no longer available.

 17430362 GU17430362 17 43 03 62
 1743 0362 1743.0362 17.43.03.62

Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK BP6ES spark plugs, 2 x condensers, 1 x set points, 2 x sump gaskets, 2 x rocker cover gaskets and all crush washers to complete a service on your bike.

Save time and hassle by ordering service oil kit OIA14001 with your service kit

Save £'s by buying everything in a service kit

For models with electronic ignition see SIA18002, if you have a deep sump you'll need an extra sump gasket (ENA14036). Oils and lubricants available separately. The oils you need are 1 x OIA11036 and 1 x OIA08194

 3 in stock

Replacement alternator rotor for Bosch systems

See ELA17400 for matching stator and TOA14008 for rotor removal tool. We recommend changing the timing cover oil seal ENA90428 when changing the rotor. Also fits Yamaha RD350, FZR1000 and 1000 Fazer. Note that new rotors may need energizing, see our faultfinder for details.

 1 in stock

Also fits Benelli 900 Sei (Series 2)

Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK BP6ES spark plugs, 2 x condensers, 1 x set points, 1 x sump gasket, 2 x rocker cover gaskets and all crush washers to complete a service on your points equipped round barrel model.

Save time and hassle by ordering service oil kit OIA14001 with your service kit

Save £'s by buying everything in a service kit

For models with electronic ignition see SIA14002, if you have a deep sump you'll need an extra sump gasket (ENA14036). Oils and lubricants available separately. The oils you need are 1 x OIA11036 and 1 x OIA08194. See ENA95006 for gauze oil filter tab washer

 3 in stock

Flywheel, originally intended for dual point and Motoplat ignitions

2-33° of ignition advance. Supercedes V7 loop frame flywheel 12067000 . Weighs 4.2kg. Convert uses a different flywheel - 18067052

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 6 in stock, request a quote

 17067050 GU17067050 17 06 70 50
 1706 7050 1706.7050 17.06.70.50