Shop headings: New Spares | Used Spares | Accessories | Brands
17 Results - Page 1 of 2
Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint
To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005
Availability varies on this part, check availability
14003240 GU14003240 14 00 32 40
1400 3240 1400.3240 14.00.32.40
£128.00
INC VAT
£106.67 EX VAT
Sump bolt kit containing all replacement stainless steel socket cap bolts for models with a sump extension fitted. Some models e.g. Cali 1100 and series 1 Cali EV models have a sump extension fitted as standard
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). For Cali EV models check whether you have a sump extension fitted, the later one piece deep sump uses SSA80008
More than 5 in stock
£16.00
INC VAT
£13.33 EX VAT
Sump bolt kit containing all replacement stainless steel socket cap bolts for models without a sump extension fitted
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)
More than 5 in stock
£10.00
INC VAT
£8.33 EX VAT
Stainless steel fasteners kit for PHF and PHM carb models with sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike
This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 149 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)
3 in stock
£85.00
INC VAT
£70.83 EX VAT
Stainless steel fasteners kit for PHF and PHM carb models without sump extension.This kit contains nuts, bolts and washers for the following: distributor clamp, rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike
This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 149 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)
3 in stock
£85.00
INC VAT
£70.83 EX VAT
Dimensions:
117mm tip to flange under head
Short dipstick for models without a sump extension
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
We need to check whether we have stock of this part, check availability
17004951 GU17004951 17 00 49 51
1700 4951 1700.4951 17.00.49.51
£24.00
INC VAT
£20.00 EX VAT
A2 stainless socket cap screw M6 x 55, used for long sump bolt on 850/1000 models where there isn't a sump extension, but used for shorter sump bolt where a sump extension is fitted
14 required if used with sump extension, 4 if used without sump extension
More than 5 in stock
£1.20
INC VAT
£1.00 EX VAT
Quality sump gasket, used for upper sump gasket on V11 Sport, 1100 Sport and Daytona RS. See ENA01360 for lower sump gasket for V11 Sport, 1100 Sport and Daytona RS. See ENA05630 for lower sump gasket for CARC models up to 2015.
Two required if you have a sump extension fitted. Supercedes Guzzi ref. 01003650
More than 5 in stock
14003600 GU14003600 14 00 36 00
1400 3600 1400.3600 14.00.36.00
£4.40
INC VAT
£3.67 EX VAT
Screw in plastic dipstick for models with sump extension fitted. Uses O Ring ENA90706
base of flange to end measures 162mm
This part is due back in stock soon, call 01484 841395 to reserve yours
30004910-z 30004910 GU30004910 30 00 49 10
3000 4910 3000.4910 30.00.49.10
£10.20
INC VAT
£8.50 EX VAT
A2 stainless socket cap screw M6 x 90mm, used for long sump mount bolts where a sump extension is fitted
More than 5 in stock
£1.40
INC VAT
£1.17 EX VAT