Brembo PS 12 front master cylinder overhaul kit / rebuild kit for models with a trapezoid handlebar mounted reservoir

This seal kit is also known as Brembo ref. 10.4090.20

 Availability varies on this part, call us to check availability

If you would like to be emailed once this item is available again then click here

 28659300 GU28659300 28 65 93 00
 2865 9300 2865.9300 28.65.93.00

Dimensions:
12.67mm x 72mm

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease.

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need kit BRA37232

 5 in stock

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Dimensions:
Solid piston 15.84mm OD x 65mm

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals, spring, circlip and brake grease

This kit is for overhauling PS16 master cylinders where the piston is retained by a circlip (i.e. BRA19001 )

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

Dimensions:
Hollow piston

Brembo master cylinder overhaul kit / rebuild kit for overhauling foot operated PS11B and PS11C master cylinders. Includes all seals and brake grease. Can also be used to repair handlebar master cylinders 10477610 and 10477650

This seal kit replaces Guzzi part numbers 66139790

 Available to order — usually dispatched within 28 days. Please contact us if you need to confirm the timing.

 10436241 GU10436241 10 43 62 41
 1043 6241 1043.6241 10.43.62.41

Also fits Ducati Monster S2R, Ducati 748 SP, Biposto, Ducati 750 SS (1992), Ducati 750 SS (1994), Ducati 888 (1993-), Ducati 900 SS (1992), Ducati 900 SS/SL (1994-1997), Ducati 916 (1994), Ducati 916 Monop.-Senna (1995-), Ducati 916 SP (1996), Ducati Monster 900 (1993), Ducati Monster 900 (1994), Ghezzi Brian Supertwin,

Dimensions:
piston measures 10.95mm x 38.4mm overall

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 2 in stock

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

Dimensions:
Solid piston 12.7mm OD x 65mm

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 More than 5 in stock

Also fits Cagiva Elefant E750, Ducati 748

Dimensions:
Hollow piston 13mm OD x 38mm

Rear brake master cylinder, foot operated. Brembo no longer offer overhaul kits for recent models so this is your only option if your master cylinder is faulty.

 1 in stock

2B000508

Brembo master cylinder rebuild kit for overhauling handlebar mounted PS 15 master cylinders. Includes all seals, circlip and brake grease

This seal kit also known as Guzzi refs. 079539686, 079539632, 079539739, 079539685, 079539680 and 079539633. See this link for help with fitting this kit.

This kit has been superceded by BRA37233

 1 in stock

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Dimensions:
15.8mm OD piston x 65mm

Brembo PS 16 rear master cylinder for models with a remote reservoir, suitable as a replacement for the standard PS15 master cylinder which has now been discontinued by Brembo. Supplied with operating lever. Mounting holes at 50mm centres

Brembo ref. 10.2934.02 See BRA19500 for the elbow that the fluid supply pipe fits onto. Also see BRC19001 for a reconditioned PS15 MC. See BRA37232 for an overhaul kit for this master cylinder.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 19667000 GU19667000 19 66 70 00
 1966 7000 1966.7000 19.66.70.00

Rear brake master cylinder PS 13C, foot operated.

Supercedes Guzzi ref. AP8113502. Guzzi recommend this part as the replacement for the PS12B master cylinder 27667015 fitted to the Quota 1000 and NTX models. Note that the mounting bracket on the Quota will need an additional hold drilling to fit this master cylinder (different mounting centres). NTX models will need a new bracket fabricating. See BRA28659 for overhaul kit

 Available to order — usually dispatched within 28 days. Please contact us if you need to confirm the timing.

 30667030 GU30667030 30 66 70 30
 3066 7030 3066.7030 30.66.70.30

Dimensions:
40mm spacing between mountings