Rear crash bar set, bright chrome finish

 This part is available by special order, request a quote

29458251-Z

Flywheel for models with Digiplex ignition

Weighs 4.3kg

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

 29067040 GU29067040 29 06 70 40
 2906 7040 2906.7040 29.06.70.40

Pair of Wirth progressive fork springs

These progressive fork springs improve ride quality and handling by responding progressively to the road. The more the spring is compressed the harder it becomes preventing the forks from bottoming out. See OIA01001 for fork oil

 This part is available by special order, request a quote

Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint

To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005

 Availability varies on this part, check availability

 14003240 GU14003240 14 00 32 40
 1400 3240 1400.3240 14.00.32.40

Brembo P08 / F08 ( P8 ) right hand (if mounted behind fork leg) single bleed (M10 bleed nipple) brake caliper. Also used as rear caliper if mounted in underslung position

Coated aluminium pistons

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 14 in stock, request a quote

 28652201 GU28652201 28 65 22 01
 2865 2201 2865.2201 28.65.22.01

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

 1 in stock

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Brembo P08 / F08 ( P8 ) left hand (if mounted behind fork leg) or rear (mounted above and behind wheel spindle) single bleed (M10 bleed nipple) brake caliper

Coated aluminium pistons

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

 28653001 GU28653001 28 65 30 01
 2865 3001 2865.3001 28.65.30.01

Output flange for drive box, engages with the driveplate on the wheel

Also known as Guzzi ref. 17351401. 8 hole M8 fixing in flange

 This part is available by special order, request a quote

 17351400 GU17351400 17 35 14 00
 1735 1400 1735.1400 17.35.14.00

Set of 3 piston rings for Nikasil 92mm bore

Only for Cali 1100 frame prefixes KC and KD, for KG and KH prefixes see ENA18601

 This part is available by special order, request a quote

30060660-z 30060660 GU30060660 30 06 06 60
 3006 0660 3006.0660 30.06.06.60

Long swing arm with brace and hole for threaded caliper plate pin

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 5 in stock, request a quote

 30540260 GU30540260 30 54 02 60
 3054 0260 3054.0260 30.54.02.60