Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
240mm length
Long 10 spline driveshaft
This part is available by special order, request a quote
29326300 GU29326300 29 32 63 00
2932 6300 2932.6300 29.32.63.00
£73.90
INC VAT
£61.58 EX VAT
12 volt coil
Two required per bike, only for injection models
Sorry, this part is no longer available.
29716562 GU29716562 29 71 65 62
2971 6562 2971.6562 29.71.65.62
Sorry this item is out of production
Set of chrome instrument surround pods for 100mm clocks (speedo and tacho)
Sorry, this part is no longer available.
30761960/30762060
Sorry this item is out of production
Passenger saddle.
Some seats are missing mounting lugs- please call us to check condition
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
10 in stock, request a quote
30464060 GU30464060 30 46 40 60
3046 4060 3046.4060 30.46.40.60
Prices from
£50.00 - £70.00
inc VAT dependent on condition
Sidestand, may be supplied with or without bracket
Can also be used in place of 18432050
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
5 in stock, request a quote
03432045 GU03432045 03 43 20 45
0343 2045 0343.2045 03.43.20.45
Prices from
£40.00 - £70.00
inc VAT dependent on condition
Passenger saddle
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
29464050 GU29464050 29 46 40 50
2946 4050 2946.4050 29.46.40.50
Prices from
£30.00 - £70.00
inc VAT dependent on condition
Dimensions:
160mm from end to sealing o ring, 20mm thread
Long screw in polished alloy thermometer dipstick with O ring for models with a sump extension. Shows oil temperature in degrees celcius
Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick
This part is due back in stock soon, call 01484 841395 to reserve yours
28004950-z 28004950 GU28004950 28 00 49 50
2800 4950 2800.4950 28.00.49.50
£70.00
INC VAT
£58.33 EX VAT
Dimensions:
38mm diameter
Replacement Dellorto throttle slide for PHF36 carbs, the original slide is no longer available from Dellorto. To fit this slide you may need to make a minor modification to the slide or your carb body. This can be made with a small file or Dremel type tool, see these instructions for details
This part is available by special order, request a quote
75527554 GU75527554 75 52 75 54
7552 7554 7552.7554 75.52.75.54
£70.00
INC VAT
£58.33 EX VAT
Dimensions:
47mm OD
Gearbox bearing for output shaft input end
Two part bearing
This part is due back in stock soon, call 01484 841395 to reserve yours
92234717
£68.50
INC VAT
£57.08 EX VAT
Dimensions:
Pipes 18mm OD and 14mm OD
Fuel pipe / hose assembly including 'T' junction
This part is available by special order, request a quote
30106570 GU30106570 30 10 65 70
3010 6570 3010.6570 30.10.65.70
£67.00
INC VAT
£55.83 EX VAT
Secure online shopping 
