Pair of New French front brake shoes

 This part is available by special order, request a quote

 10620800 GU10620800 10 62 08 00
 1062 0800 1062.0800 10.62.08.00

Polished aluminium brake lever for twin leading shoe models only

 This part is available by special order, request a quote

A2 stainless steel socket cap bolt

 This part is available by special order, request a quote

Throttle cable

Ball end at twistgrip

 This part is due back in stock soon, call 01484 841395 to reserve yours

10117500-z 10117500 GU10117500 10 11 75 00
 1011 7500 1011.7500 10.11.75.00

Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on

 This part is available by special order, request a quote

Set of ignition points contacts

 Sorry, this part is no longer available.

 10709600 GU10709600 10 70 96 00
 1070 9600 1070.9600 10.70.96.00

CEV type lights (off/pilot/on), main beam and horn switch. Supplied without wires, you will need to solder your wiring into the switchgear using a minimum 60W soldering iron. Switch fixes to handlebars using included screws

Can be fitted to left or right side of bars

 This part is due back in stock soon, call 01484 841395 to reserve yours

12746001-z 12746001 GU12746001 12 74 60 01
 1274 6001 1274.6001 12.74.60.01

Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.

Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear

 This part is due back in stock soon, call 01484 841395 to reserve yours

 01738030 GU01738030 01 73 80 30
 0173 8030 0173.8030 01.73.80.30

Kit containing two replacement 60cm silicon HT leads, lead ends and 90° plug caps. The leads are suppied as a single double length lead so you can cut it into two leads of the exact required length. Includes crimp on lead ends for standard big twin 12v round coils

Suitable for most models with coils under the tank where the HT lead is not moulded into the ignition coil. We recommend checking what type of plug cap you have and measuring your existing cable run to check this part will fit

 This part is due back in stock soon, call 01484 841395 to reserve yours

Push button starter switch, chrome finish body, screw contacts to rear

 This part is available by special order, request a quote

26735001-z 26735001 GU26735001 26 73 50 01
 2673 5001 2673.5001 26.73.50.01