Shop headings: New Spares | Used Spares | Accessories | Brands
Clamp on bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors
Ideal for models like the V7 Racer where bar ends are fitted. This elegant LSL Clubman mirror fits all 22mm and 1" bars. Fits left or right. Blue tinted glass to reduce glare
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
2 in stock
£64.00
INC VAT
£53.33 EX VAT
Long screw in polished alloy thermometer dipstick with O ring for models with a sump extension. Shows oil temperature in degrees celcius
Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick
This part is due back in stock soon, call 01484 841395 to reserve yours
28004950-z 28004950 GU28004950 28 00 49 50
2800 4950 2800.4950 28.00.49.50
£70.00
INC VAT
£58.33 EX VAT
K&N high performance air filter, cylindrical paper cartridge type
This part is available by special order, request a quote
AP8104211
Also fits Aprilia RSV 1000 MILLE (2001-2003), Aprilia Tuono 1000 (2003-2005)
£80.00
INC VAT
£66.67 EX VAT
Universal rack for mounting H & B top cases to luggage racks which don't have the H & B fitting. Includes grab rail, finished in black.
Because this is a universal rack you may need to do some additional drilling and obtain extra fasteners depending upon which type of luggage rack you are fitting this to
This part is available by special order, request a quote
£82.00
INC VAT
£68.33 EX VAT
Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick
To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate
This part is available by special order, request a quote
£99.00
INC VAT
£82.50 EX VAT
The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.
The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!
This part is available by special order, request a quote
£100.00
INC VAT
£83.33 EX VAT
Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range.
To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part also known as a windage plate
This part is available by special order, request a quote
£115.00
INC VAT
£95.83 EX VAT
Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.
The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
This part is available by special order, request a quote
£115.00
INC VAT
£95.83 EX VAT
Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint
To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005
Availability varies on this part, check availability
14003240 GU14003240 14 00 32 40
1400 3240 1400.3240 14.00.32.40
£128.00
INC VAT
£106.67 EX VAT
Replacement clutch plate for single plate RAM clutches
Torque setting for fitting this is 25Nm with a thread locking compound
This part is available by special order, request a quote
£146.00
INC VAT
£121.67 EX VAT