These clever spacers allow the fitting of the taper roller head bearings which are standard on later small twins in place of the often damaged and fiddly OE ball bearing races.The taper roller bearings last much longer and are easily replaced unlike the ball bearing races

This part consists of 2 x taper roller adapters and a pair of taper roller bearings, depending on the condition of your stem it may be necessary to shim the taper roller bearings. You may find that extra headlamp rubbers SUA39701 are required to take up the extra distance between the top and bottom yoke on the fork stanchions. See The Shed for instructions.

 Sorry, this part is no longer available.

 39515000 GU39515000 39 51 50 00
 3951 5000 3951.5000 39.51.50.00

Bridgestone Battlax 110/90-18 speed rated to 130 MPH.

Bridgestone's Battlax BT46 replaces the iconic Battlax BT-45. The iconic BT-45 was upgraded with a new modern design that increases wet performance with no impact on its well-known dry handling performance and high mileage. RC Polymer technology optimizes the distribution of silica in the rubber compound and improves tread flexibility, allowing greater contact with the road surface in both hot and cold conditions. The reduction in molecular friction also improves rolling resistance, therefore increasing fuel economy.

 Order now and we will post your order within 7 days.

BT46

Polished chrome alternator cover for small twins with Guzzi eagle motif

A great way to brighten up the front of your engine. The stock black plastic spacer is required to fit this part to models with Ducati charging systems (i.e. Breva 750, late Nevadas, V7 Classic and Cafe), please call to order if your bike isn't already fitted with this part. Also known as Guzzi ref. 32001610 and 19001620. NB not for V50 II or V35 I which use ACA18650

 1 in stock

27001636-z 27001636 GU27001636 27 00 16 36
 2700 1636 2700.1636 27.00.16.36

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

 1 in stock

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Rectangular Euro spec (RH dip) headlight with bulb holder

Also known as Guzzi ref. 14740555. These are not available in UK spec, rubber bulb cover is not included

 This part is available by special order, request a quote

28740560-z 28740560 GU28740560 28 74 05 60
 2874 0560 2874.0560 28.74.05.60

Tail light, includes bulb holders and plastic casing. Note that on the 1000S the plastic casing is not required, the light fastens directly to a flat plate which is not supplied with this light.

Includes clear section to illuminate numberplate.

 Sorry, this part is no longer available.

 23740910 GU23740910 23 74 09 10
 2374 0910 2374.0910 23.74.09.10

Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.

 Sorry, this part is no longer available.

Original spec headlight lens and relector unit with Euro spec right hand dip

Bulbs not included. No longer in production

 Sorry, this part is no longer available.

 19740455 GU19740455 19 74 04 55
 1974 0455 1974.0455 19.74.04.55

Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.

The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.

Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted

Perfect for that classic cafe racer look

 This part is available by special order, request a quote

Bridgestone Battlax 100/90-18 speed rated to 130 MPH.

Bridgestone's Battlax BT46 replaces the iconic Battlax BT-45. The iconic BT-45 was upgraded with a new modern design that increases wet performance with no impact on its well-known dry handling performance and high mileage. RC Polymer technology optimizes the distribution of silica in the rubber compound and improves tread flexibility, allowing greater contact with the road surface in both hot and cold conditions. The reduction in molecular friction also improves rolling resistance, therefore increasing fuel economy.

 Order now and we will post your order within 7 days.

BT46