Shop headings: New Spares | Used Spares | Accessories | Brands
M16 stainless steel full nut and thick washer for rear wheel spindle
Also referred to as Guzzi ref. 14634400 and 92602316
More than 5 in stock
92602316-z 92602316 GU92602316 92 60 23 16
9260 2316 9260.2316 92.60.23.16
£10.50
INC VAT
£8.75 EX VAT
M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer
NB this is a half nut. Can also be used as alternator retaining nut 92603516
More than 5 in stock
92602516-z 92602516 GU92602516 92 60 25 16
9260 2516 9260.2516 92.60.25.16
£8.50
INC VAT
£7.08 EX VAT
Taper needle roller bearing used as steering head bearing
2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake
More than 5 in stock
92249225 GU92249225 92 24 92 25
9224 9225 9224.9225 92.24.92.25
£20.50
INC VAT
£17.08 EX VAT
Stainless steel M4 screw for attaching points to backplate
2 required. Slotted screw
More than 5 in stock
£0.90
INC VAT
£0.75 EX VAT
A2 stainless socket cap screw M5 x 50, used for retaining Saprisa alternator stator
More than 5 in stock
98620250-z 98620250 GU98620250 98 62 02 50
9862 0250 9862.0250 98.62.02.50
£1.20
INC VAT
£1.00 EX VAT
Premium softstyle grey T-shirt printed with classic Moto Guzzi logo in white on the chest.
Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!
Sizing:
More than 5 in stock
£18.00
INC VAT
£15.00 EX VAT
Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease
This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).
Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.
More than 5 in stock
39659000 GU39659000 39 65 90 00
3965 9000 3965.9000 39.65.90.00
Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4
£26.00
INC VAT
£21.67 EX VAT
Brembo pad pin kit for Brembo F05 (P5) calipers. Contains one long pin, two short and retaining spring
Brembo ref. 120280010, also used on some Laverdas . Front calipers only on Strada
More than 5 in stock
39659100 GU39659100 39 65 91 00
3965 9100 3965.9100 39.65.91.00
Also fits Benelli 250 TS
£19.50
INC VAT
£16.25 EX VAT
Inner Tacho (rev counter) Cable (fits inside your old cable outer)
We advise you to measure your existing cable before ordering in case you have a non standard set up.
More than 5 in stock
£5.40
INC VAT
£4.50 EX VAT
Right hand short choke cable
We advise you to measure your existing cable before ordering in case you have a non standard set up.
More than 5 in stock
19133500-z 19133500 GU19133500 19 13 35 00
1913 3500 1913.3500 19.13.35.00
£6.10
INC VAT
£5.08 EX VAT