Flanged brake disc bolt for rear brake disc

6 bolts required per disc. Supercedes Guzzi ref. 894505

 This part is due back in stock soon, call 01484 841395 to reserve yours

2B002417

Also fits Aprilia RSV 4 (2011-2012), Aprilia Dorsoduro, Aprilia Caponord 1200 (2014-2016)

The BoosterPlug is an effective and cost efficient way to cure the fuelling problems on twin throttle body V7 mark 1 models.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

• Improved and gentler throttle action when opening and closing throttle
• Richer mixture when opening the throttle improves acceleration
• Removes the uneven low speed running that is typical for modern lean burn engines
• Stronger and more consistent at idle.
• Reduced backfiring with aftermarket exhausts on engine braking
• Improved fuel economy

The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!

• Improved and gentler throttle action when opening and closing throttle
• Richer mixture when opening the throttle improves acceleration
• Booster plug removes the uneven low speed running that is typical for modern lean burn engines
• Stronger and more consistent at idle.
• Reduced backfiring with aftermarket exhausts on engine braking
• Lifetime warranty

 This part is due back in stock soon, call 01484 841395 to reserve yours

Footrest bracket

 This part is available by special order, request a quote

 32441210 GU32441210 32 44 12 10
 3244 1210 3244.1210 32.44.12.10

Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.

Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap

 More than 5 in stock

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

 5 in stock

A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models

Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230

 4 in stock

 01659230 GU01659230 01 65 92 30
 0165 9230 0165.9230 01.65.92.30

Brembo rubber bleed nipple cap without retaining ring

 More than 5 in stock

Mounting bolt for brake caliper, bolts caliper to fork leg. Supplied in zinc finish.

 2 in stock

AP8152385

Hex head brake disc bolt, mainly used for rear brake disc but also used for frame applications

Also known as Guzzi ref. 597150, 6 bolts required per disc

 4 in stock

 98682425 GU98682425 98 68 24 25
 9868 2425 9868.2425 98.68.24.25