Reconditioned Valeo starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. Minor modification may be required on some pre 1990 models to make room for the solenoid. Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology. See , see this link for the modifications required to fit a Valeo starter to a 4 speed model.

This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Also known as Guzzi ref. 30730710
Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part

 This part is due back in stock soon, call 01484 841395 to reserve yours

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

 1 in stock

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Replacement starter motor for 2006 on models. Also known as 97729R

This is a less expensive aftermarket replacement for the OE starter.
Not interchangeable with Valeo and Bosch starters from earlier models. Get a £20 discount on this part if you send us your faulty but reconditionable starter motor

 1 in stock

 05730730 GU05730730 05 73 07 30
 0573 0730 0573.0730 05.73.07.30

Reconditioned starter motor and solenoid for 2006 on models in black and silver finish. These units are high quality OE parts made by Bosch or Mitsubishi. Professionally reconditioned and sold with a 12 month guarantee

This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address (see bottom of page). Not interchangeable with Valeo and Bosch starters from earlier models.

NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. Also known as Guzzi ref. 97729R

 05730730 GU05730730 05 73 07 30
 0573 0730 0573.0730 05.73.07.30

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

• Valve body, CNC precision turned part made of high quality steel
• Copper crush washer
• Hose connector, CNC precision turned part made of high quality steel
• High quality hose 40cm long
• Protection cover made of aluminum, anodized
• Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

 5 in stock

UJ and driveshaft spring

 1 in stock

 94321099 GU94321099 94 32 10 99
 9432 1099 9432.1099 94.32.10.99

Small internal side stand spring

 This part is available by special order, request a quote

AP8121014

Large external side stand spring

 This part is available by special order, request a quote

AP8221197

External clutch operating lever return spring for gearbox

 More than 5 in stock

 94321105 GU94321105 94 32 11 05
 9432 1105 9432.1105 94.32.11.05