Shop headings: New Spares | Used Spares | Accessories | Brands
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included
1 in stock
£30.90
INC VAT
£25.75 EX VAT
Old type 4 pin starter relay in metal case. Note that this has two large terminals and two smaller ones, depending on model you may need to fit wider spade connectors to fit this relay. See ELA10003 for large female spade connectors
This part is due back in stock soon, call 01484 841395 to reserve yours
12732500 GU12732500 12 73 25 00
1273 2500 1273.2500 12.73.25.00
£30.90
INC VAT
£25.75 EX VAT
Pair of black side panel grilles for metal side panels, attach via 4 pins and clips (FRA39922)
Black side panel trims
This part is available by special order, request a quote
17925100 GU17925100 17 92 51 00
1792 5100 1792.5100 17.92.51.00
£30.90
INC VAT
£25.75 EX VAT
Small round left hand bar end mirror finished in black. Knuckle allows adjustment of mirror. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Perfect for achieving that minimal look on your bike
Availability varies on this part, check availability
£30.90
INC VAT
£25.75 EX VAT
Modern solid state electronic regulator for models with Bosch charging system
Bolts to original mounting point but this replacement part is not as tall as the old metal regulator. Also known as Guzzi ref. 17703800. Replaces ELA29704
See our Bosch fault finder page for help diagnosing problems on your Bosch charging system. The original type mechanical regulator is no loger available
1 in stock
29703800-z 29703800 GU29703800 29 70 38 00
2970 3800 2970.3800 29.70.38.00
£30.00
INC VAT
£25.00 EX VAT
Taper roller bearing, used for front wheel on loop frame models with 2 shoe front drum
2 required for front wheel on loop frame models. Also known as Guzzi ref. 92201421. Rear wheel bearing for loop frames (2 required) and V7 Sport / 750S
See WHA90249 for bearing seal
This part is due back in stock soon, call 01484 841395 to reserve yours
92246922-z 92246922 GU92246922 92 24 69 22
9224 6922 9224.6922 92.24.69.22
£29.80
INC VAT
£24.83 EX VAT
Pair of ignition points (made up of Guzzi part numbers 14715429 and 14715430)
More than 5 in stock
14719800 GU14719800 14 71 98 00
1471 9800 1471.9800 14.71.98.00
£29.50
INC VAT
£24.58 EX VAT
Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder
NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060
This part is due back in stock soon, call 01484 841395 to reserve yours
£29.50
INC VAT
£24.58 EX VAT
Chrome finish tail light support bracket. Unavailable for many years, now back in production
Also available in black
This part is available by special order, request a quote
14474370 GU14474370 14 47 43 70
1447 4370 1447.4370 14.47.43.70
£29.40
INC VAT
£24.50 EX VAT
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT