Footpeg rubber for riders and pillion pegs (depending on model)

 1 in stock

2B002225

Rubber exhaust mount for crossover

2 required per bike, see EXG05124 for special bolt

 1 in stock

 05124230 GU05124230 05 12 42 30
 0512 4230 0512.4230 05.12.42.30

Rubber cap for oil pressure switch

 2 in stock

 12717600 GU12717600 12 71 76 00
 1271 7600 1271.7600 12.71.76.00

Black top hat profile anti vibration rubber

 More than 5 in stock

 93231605 GU93231605 93 23 16 05
 9323 1605 9323.1605 93.23.16.05

Stand buffer rubber, threaded M6 stud

 This part is available by special order, request a quote

AP8144487

1 litre of Rotra MP EP80/90 mineral based gear oil for gearboxes and drive boxes

Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. Surpasses API GL-5, MIL L 2105 D, MAN 342 type M1, MAN 342 type M2 (Approved)
Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

 This part is due back in stock soon, call 01484 841395 to reserve yours

Roller tappet kit C for converting your 4 valve per cylinder model to the later rollerised tappets

All 4v/cyl 1200 Sport models use this kit.

For Griso and Stelvio your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.02 from 2014. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

 This part is available by special order, request a quote

1A002082

Roller tappet kit B for converting your 4 valve per cylinder model to the later rollerised tappets

Your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.02 from 2014. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

 This part is available by special order, request a quote

1A002063

Roller tappet kit A for converting your 4 valve per cylinder model to the later rollerised tappets

Your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.20 from 2013. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

 This part is available by special order, request a quote

1A002060

O ring seal OR112 for rear master cylinder rod

 This part is available by special order, request a quote

AP8120178