Pair of black knurled alloy bar ends, fixes via included bolt

Only for models with standard steel handlebars, not for aluminium handlebars

 This part is available by special order, request a quote

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

 More than 5 in stock

Also fits Benelli 250 TS

Brilliant chrome, aluminium and metal polish.

Make your Guzzi gleam.

 This part is due back in stock soon, call 01484 841395 to reserve yours

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   1 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Ninety degree angle extender for schrader tyre valves. Improves access to valve for tyre pressure checking

Suitable for 130/70 x 17, 140/70 x 17, 130/80 x 70, 120/90 x 17 tyres

 4 in stock

Air filter, flat paper cartridge type for models with single throttle body

See SIA10434 for a reusable performance air filter

 More than 5 in stock

AP8104924

Pair of reverse cone stainless steel performance silencers from Agostini. The polished finish reverse cone design compliments the classic styling of the V7 models, the silencers are shorter than the original silencers. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding pair of silencers.
4kg lighter that stock silencers
Benefit from increased power and torque
Release the music in your Guzzi!

Euro 5 compliant
No remap required
No remapping required

Pair of Agostini Mandello short pipe style silencers specifically designed for Moto V7 850 in stainless steel and customized with the laser engraved Agostini Mandello del Lario logo.

These silencers are specially designed to be mounted directly on the attachment points of the original silencers without the need for any modification; They are also expressly designed to enhance the performance of the Mandello twin cylinders. On all the models for which they are designed, they guarantee an increase in performance and a lowering of the rpm at which maximum power is obtained, allowing the bike to breathe much better at all rpm.

All silencers are equipped with a removable dbkiller.

Inside the packaging there are instructions and the certificate of approval

 Availability varies on this part, check availability

1 litre of Agip SAE 7.5W fork oil. Eni Fork Oil 7.5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required.

Eni Fork Oil 5W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 5W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 5W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock