Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
10mm/15mm OD
Round plastic bulb holder for instrument warning lights.
Requires minor modification to fit - you will need to either file down the locating lug in the instrument console or open up the locating groove on the bulb holder. For bulb LIA93140
5 in stock
14768655 GU14768655 14 76 86 55
1476 8655 1476.8655 14.76.86.55
£10.00
INC VAT
£8.33 EX VAT
Dimensions:
Large
Premium softstyle grey T-shirt printed with classic Moto Guzzi logo in white on the chest.
Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!
Sizing:
5 in stock
£18.00
INC VAT
£15.00 EX VAT
Dimensions:
38mm OD x 20mm
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
4 in stock
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
Dimensions:
320mm outer length, 70mm free length, 2.7mm barrel nipple, 2.7mm barrel nipple
Left hand choke cable
We advise you to measure your existing cable before ordering in case you have a non standard set up.
4 in stock
17133550 GU17133550 17 13 35 50
1713 3550 1713.3550 17.13.35.50
£9.00
INC VAT
£7.50 EX VAT
Dimensions:
1110 mm outer length, 99mm free length, 5.7mm barrel nipple, 2.7mm barrel nipple
Throttle cable for models with plastic twistgrip and switchgear
Only suitable for post 1979 models. We advise you to measure your existing cable before ordering in case you have a non standard set up.
4 in stock
18117560 GU18117560 18 11 75 60
1811 7560 1811.7560 18.11.75.60
£10.00
INC VAT
£8.33 EX VAT
Continental type fuse, rated at 25 amp (blue)
4 in stock
£0.90
INC VAT
£0.75 EX VAT
Rubber brakelight switch cover, 90 Degree
Also known as Guzzi ref. 10352710
4 in stock
12735100-z 12735100 GU12735100 12 73 51 00
1273 5100 1273.5100 12.73.51.00
£3.20
INC VAT
£2.67 EX VAT
Dimensions:
27mm x 16mm x 25mm excluding side clips
15 pin male block connector, used for main loom connections. See ELA17738 for the Molex connectors that go in this block. Use female molex connectors with this block
NB this connector has one zigzag end
4 in stock
£3.60
INC VAT
£3.00 EX VAT
Dimensions:
88mm round barrel
Top end gasket and seal set containing rocker cover, base and head gaskets plus top end O rings
Top end gasket set for one cylinder. Inlet manifold gasket ENA14500 and exhaust gasket ENA90718 available separately
4 in stock
£14.40
INC VAT
£12.00 EX VAT
Dimensions:
Reach of approx. 170mm from central banjo to head
Stainless steel braided hose oil lines for heads on square barrel models. See ENA14662 if you also need threaded link to cylinder head
Always replace crush washers (SIA12200 x 2 and SIA10900 x 2) when replacing oil lines, you may also require our banjo bolt ENA95990. Also known as Guzzi ref. 01153600 and 01153602
4 in stock
14153660 GU14153660 14 15 36 60
1415 3660 1415.3660 14.15.36.60
£53.00
INC VAT
£44.17 EX VAT
Secure online shopping 
