Shop headings: New Spares | Used Spares | Accessories | Brands
Reconditioned starter motor and solenoid in black and silver finish. Professionally reconditioned and sold with a 12 month guarantee. This is a suitable replacement for Bosch 8 or 9 tooth Guzzi starter motors. See ELA14738 for replacement solenoid.
This may fit Loop frame models with 5 speed gearboxes, you will need to trim a clearance into the battery tray to make room. The clutch cable bracket will prevent fitment on 4 speed models.
This is an exchange only item, we can supply these before receiving your exchange unit subject to a refundable deposit so you can keep your bike on the road. See ELC10737 for the refundable deposit. Send your old starter motor to our registered address. NB In case of starter motor problems do not tap the casing as this will certainly cause it to fail. See SSA08075 for mounting bolts. Do not remove second nut from terminal posts when fitting - this nut is required to hold the terminal in place
2 in stock
14730554 GU14730554 14 73 05 54
1473 0554 1473.0554 14.73.05.54
£155.00
INC VAT
£129.17 EX VAT
Dimensions:
42mm OD for silencer, 38mm ID at downpipe end
Polished stainless steel H pipe / collector / balance pipe for models without Lambda probe. Replaces heavy catalytic converter fitted to some models and improves access for oil changes
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock
03123900 GU03123900 03 12 39 00
0312 3900 0312.3900 03.12.39.00
£60.00
INC VAT
£50.00 EX VAT
Special nut for retaining crankshaft timing sprocket. Also used as clutch centre nut on V11 Sport See TOA18651 for special tool to remove and tighten this nut. Nut also known as Guzzi ref. 93601025. See ENA92525 for correct part for series 2 Cali 1100s
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock
93601026 GU93601026 93 60 10 26
9360 1026 9360.1026 93.60.10.26
£3.00
INC VAT
£2.50 EX VAT
Brembo left hand (if mounted in front of fork leg) P08 / F08 ( P8 ) twin bleed (M6 bleed nipples) brake caliper
Also used on period Laverda and Ducati models
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
14652200 GU14652200 14 65 22 00
1465 2200 1465.2200 14.65.22.00
Prices from
£60.00 - £150.00
inc VAT dependent on condition
Short swing arm
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
18540200 GU18540200 18 54 02 00
1854 0200 1854.0200 18.54.02.00
Prices from
£60.00 - £90.00
inc VAT dependent on condition
Dimensions:
M12 x 274mm - 283mm
Front engine mounting bolt for models where the sidestand is not bolted through the engine mounting bolt. See SSA14450 for alternative part
Also known as Guzzi ref. 03429500, 14429505
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
03429500 GU03429500 03 42 95 00
0342 9500 0342.9500 03.42.95.00
£10.00
INC VAT
£8.33 EX VAT
Pair of chromed front crash bars, these attach under the headstock and to the lower framerails
Use 2 x SSA12080 for lower mounting bolts, see FRA17750 for mounting plate
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
17450200-z 17450200 GU17450200 17 45 02 00
1745 0200 1745.0200 17.45.02.00
Prices from
£18.00 - £40.00
inc VAT dependent on condition
Brake pedal or foot brake lever
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
17677050 GU17677050 17 67 70 50
1767 7050 1767.7050 17.67.70.50
Prices from
£40.00 - £75.00
inc VAT dependent on condition
Fuel tank with hole for fuel level sender, normally supplied without metal flap. Variety of colours available, all are fuel tight. Enquire for details
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
18002400 GU18002400 18 00 24 00
1800 2400 1800.2400 18.00.24.00
Prices from
£80.00 - £170.00
inc VAT dependent on condition
Dimensions:
25mm OD, 12mm overall, 11mm ID
Large Dellorto float chamber nut for PHF30 and PHF36 carbs
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
£4.80
INC VAT
£4.00 EX VAT
We are currently working on cataloguing and listing all our used stock for this web site however with tens of thousands of used spares it's taking some time!
In the meantime if you can't see what you are looking for please call us on 01484 841395 or fill in the used spares enquiry form for used spares enquiries.
Secure online shopping 
