Shop headings: New Spares | Used Spares | Accessories | Brands
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT
0.6mm shim for selector drum
More than 5 in stock
55235000 GU55235000 55 23 50 00
5523 5000 5523.5000 55.23.50.00
£1.40
INC VAT
£1.17 EX VAT
A2 stainless socket cap screw M8 x 55mm, many applications including timing cover bolts on CARC models
More than 5 in stock
£0.90
INC VAT
£0.75 EX VAT
M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins), also used for cylinder head bolt
See ACA12600 for aluminium alternative that can be undone by hand. Includes recess for O ring ENA90203
More than 5 in stock
12022600 GU12022600 12 02 26 00
1202 2600 1202.2600 12.02.26.00
£17.50
INC VAT
£14.58 EX VAT
Stainless steel front UJ gaiter / boot clip
Also known as Guzzi ref. 12548401. This clip is also suitable for some S & B air filters and inlet manifolds - check outside diameter of carb or throttle body
More than 5 in stock
93305060 GU93305060 93 30 50 60
9330 5060 9330.5060 93.30.50.60
£3.20
INC VAT
£2.67 EX VAT
M16 wavy stainless steel washer
Also known as a crinkle washer
More than 5 in stock
95129260-z 95129260 GU95129260 95 12 92 60
9512 9260 9512.9260 95.12.92.60
£0.70
INC VAT
£0.58 EX VAT
Clear Festoon type bulb suitable for use in some tail light units
More than 5 in stock
£1.20
INC VAT
£1.00 EX VAT
Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
More than 5 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£31.50
INC VAT
£26.25 EX VAT
Inner Tacho (rev counter) Cable (fits inside your old cable outer)
We advise you to measure your existing cable before ordering in case you have a non standard set up.
More than 5 in stock
£5.40
INC VAT
£4.50 EX VAT