Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of high quality large bore exhaust header pipes for standard Le Mans exhaust systems. Finished in polished stainless and made in Mandello these downpipes have been developed specifically for the Le Mans and are an excellent choice for bikes that will be ridden. Separate exhaust collets not required with these downpipes.
Hand made to order in Italy
Note that there is no crosspipe joining these downpipes as they are designed to fit with EXA50010 on Le Mans 1 and 2 models, polished and satin finish downpipes with crosspipe are available by special order
This part is available by special order, request a quote
£215.00
INC VAT
£179.17 EX VAT
Pair of YSS rear shock absorbers, milled aluminium body with black springs.
Continuous preload adjustment, fully rebuildable. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks
1 in stock
£210.00
INC VAT
£175.00 EX VAT
Rear dished drilled cast brake disc, black centre, 6 hole
Always fit new brake pads when replacing a brake disc - see BRA54724 . Also known as Guzzi ref. 14735750. Needs 6 brake disc bolts BRA98450. A quality part made in Italy
This part is due back in stock soon, call 01484 841395 to reserve yours
14635760 GU14635760 14 63 57 60
1463 5760 1463.5760 14.63.57.60
£210.00
INC VAT
£175.00 EX VAT
Pair of YSS rear shock absorbers, milled aluminium body with black springs. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks
Continuous preload adjustment, fully rebuildable. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks
Order now and we will post your order within 7 days.
£210.00
INC VAT
£175.00 EX VAT
Dimensions:
6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes
2 in stock
£205.00
INC VAT
£170.83 EX VAT
Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:
Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit
1 in stock
£205.00
INC VAT
£170.83 EX VAT
Chromed fork stanchion
Not suitable for earlier Le Mans 1000. Le Mans 1000 series 1 stanchions are 31mm longer than these.
This part is available by special order, request a quote
29525450 GU29525450 29 52 54 50
2952 5450 2952.5450 29.52.54.50
£202.00
INC VAT
£168.33 EX VAT
Classic Le Mans 1 fairing cowling kit consisting of tinted screen with edging, black screen fasteners, quality replica cowling (pre drilled and manufactured exclusively for Gutsibits) in raw finish, side and lower fairing brackets.
We can also supply a headlamp ( LIA37593 or LIA37595 ), headlamp brackets, indicators and stems and most other parts you might need to turn your bike into Le Mans 1 lookalike, call or email for details.
To mount this fairing you can use 5 x FRA06016 + 5 x FRA29577 + 2 x FRA93060 - these are not included with the kit
This part is due back in stock soon, call 01484 841395 to reserve yours
£198.00
INC VAT
£165.00 EX VAT
Starter ring gear
See ENA98420 for bolts
This part is available by special order, request a quote
17067900 GU17067900 17 06 79 00
1706 7900 1706.7900 17.06.79.00
£195.00
INC VAT
£162.50 EX VAT
Brembo PS 16 rear master cylinder for models with a remote reservoir, suitable as a replacement for the standard PS15 master cylinder which has now been discontinued by Brembo. Supplied with operating lever. Mounting holes at 50mm centres
Brembo ref. 10.2934.02 See BRA19500 for the elbow that the fluid supply pipe fits onto. Also see BRC19001 for a reconditioned PS15 MC
This part is due back in stock soon, call 01484 841395 to reserve yours
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
£195.00
INC VAT
£162.50 EX VAT