The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le 20Mans 2 Le 20Mans 3 Le All Categories

Sort by Title

Sort by Price

Page 13 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Brake Bleed Nipple 10mm

BRA36793 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000

Dimensions:
10mm threaded shank, 11mm across flats

Brake bleed screw for Brembo single bleed P2 F08 (P8) calipers.

This part is available by special order, request a quote

£3.90

INC VAT

£3.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Long Titanium

BRA36796 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats

Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.

Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap

part in stock More than 5 in stock

£7.80

INC VAT

£6.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Short Stainless Steel

SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

part in stock 5 in stock

£8.20

INC VAT

£6.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 6mm Stainless Steel

SSA00470 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT, Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
10mm threaded shank, 8mm across flats

A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

part in stock More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 6mm Titanium

BRA00471 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT

Dimensions:
6mm threaded shank, 8mm across flats

M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap

variable availability Availability varies on this part, check availability

£7.00

INC VAT

£5.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple Cover Brembo

BRA36794A Universal Part

Dimensions:
11mm overall height

Brembo rubber bleed nipple cap without retaining ring

part in stock 5 in stock

£1.00

INC VAT

£0.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Cover Brembo P08/F08 Single bleed

BRA38058 Fits 1000 SP, SP II, Spada 3, Cali 2, Cali 3, Cali 1100 (1994-1997), Le Mans 3, Le Mans 1000, Strada 1000, 1000S, T3, T4, T5

Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers

You may need to immerse the cover in warm water before fitting

part in stock 2 in stock

17654760 GU17654760 17 65 47 60
1765 4760 1765.4760 17.65.47.60

£12.50

INC VAT

£10.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Cover Twin bleed P08/F08 & P09

BRA54174 Fits S3, 750S, V7 Sport, G5, Convert, Le Mans 1, Le Mans 2, 850T, 1000 SP, T3, T4

Brembo caliper cover for models with obsolete twin bleed calipers

P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins

part in stock 4 in stock

20325410 GU20325410 20 32 54 10
2032 5410 2032.5410 20.32.54.10

£11.00

INC VAT

£9.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake caliper Mounting Shim 0.5mm

BRA95332 Fits G5, Convert, Cali 2, Cali 3, Cali 1100 (1994-1997), Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Spada ALL, T3, T4, T5, Mille GT, V7 Sport, S3, 750S, 850T

Dimensions:
.5mm thickness

Caliper mounting shim, used to precisely centre caliper over brake disc

part in stock 2 in stock

95100332 GU95100332 95 10 03 32
9510 0332 9510.0332 95.10.03.32

£1.20

INC VAT

£1.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper P08/F08 Brembo Overhaul Kit

BRA37234 Fits 850/1000 ALL Models, S3, V7 Sport, 750S, Cali 1100 (1994-1997)

Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

See BRA10310 for less expensive replica kit

part in stock More than 5 in stock

14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£29.00

INC VAT

£24.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 13 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33