UFI 30 886 00 flat type air filter, paper filament in rubber surround

NB Packaging may vary. See SIA28367 for the equivalent reusable K & N filter

 5 in stock

 28113660 GU28113660 28 11 36 60
 2811 3660 2811.3660 28.11.36.60

40mm fork seal. Two fork types are used on recent small twins, we recommend checking your old fork seal before opening

Also known as Guzzi ref. 90404052, 904040953, 90404051, 90404054

 5 in stock

90403952-z 90403952 GU90403952 90 40 39 52
 9040 3952 9040.3952 90.40.39.52

Manual right hand petrol tap with nut and filter. On, Off and Reserve settings.

Point on lever faces back in off position. Can be used to replace electronic fuel solenoid valve 37105305

 5 in stock

17105460-z 17105460 GU17105460 17 10 54 60
 1710 5460 1710.5460 17.10.54.60

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

 5 in stock

Black oval Gutsibits Racing sticker, complete with tricolore and chequred flag motif.

Ideal for covering up marks on bodywork!

 5 in stock

Inner Tacho (rev counter) Cable (fits inside your old cable outer)

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 5 in stock

Replacement green LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002

These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED

 5 in stock

Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

 5 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 5 in stock

Ball bearing for 5 speed gearboxes

 5 in stock

92295702-z 92295702 GU92295702 92 29 57 02
 9229 5702 9229.5702 92.29.57.02