Regulator rectifier for Saprisa charging systems

Male spade connectors on regulator, may be supplied with 7 connectors - see the diagram on our technical documents page for help installing this part. The standard black block connector is not compatible with the updated 7 pin reg/rec, you will instead need to fit female spade connectors to your wires.

 This part is due back in stock soon, call 01484 841395 to reserve yours

28703800-z 28703800 GU28703800 28 70 38 00
 2870 3800 2870.3800 28.70.38.00

Black twin pull Tommaselli 2c twist grip. Includes a pair of handlebar grips, for bikes with dual throttle cables from the bars

As originally fitted to Le Mans 1. Not suitable for carbs larger than 36mm (the twistgrip inner will require minor modification to operate PHM40s). This twistgrip can be used on almost any model with suitable custom cables. See ACA14450 for spare rubber. Holes for throttle cable elbow may be smaller than the original and need carefully enlarging with a drill or round file.

 1 in stock

 14603450 GU14603450 14 60 34 50
 1460 3450 1460.3450 14.60.34.50

Universal rack for mounting H & B top cases to luggage racks which don't have the H & B fitting. Includes grab rail, finished in black.

Because this is a universal rack you may need to do some additional drilling and obtain extra fasteners depending upon which type of luggage rack you are fitting this to

 This part is available by special order, request a quote

Polished aluminium alternator cover

For big twins with Bosch charging systems only. Not deep enough for later bikes with Ducati or Saprisa. See ACA18650 for deeper version.

 This part is available by special order, request a quote

18001650-z 18001650 GU18001650 18 00 16 50
 1800 1650 1800.1650 18.00.16.50

Front main bearing flange 0.2mm oversize

 This part is available by special order, request a quote

14011901-z 14011901 GU14011901 14 01 19 01
 1401 1901 1401.1901 14.01.19.01

Front main bearing flange 0.4mm oversize

 This part is available by special order, request a quote

14011902-z 14011902 GU14011902 14 01 19 02
 1401 1902 1401.1902 14.01.19.02

Front main bearing flange 0.6mm oversize

 This part is available by special order, request a quote

14011903-z 14011903 GU14011903 14 01 19 03
 1401 1903 1401.1903 14.01.19.03

Full service kit containing 1 x UFI oil filter, 2 x NGK BP7ES spark plugs, 2 x condensers, 1 x set points, 1 x sump gasket, 2 x rocker cover gaskets and all crush washers to complete a service on your points equipped round barrel Le Mans.

Save time and hassle by ordering service oil kit OIA14001 with your service kit

Save £'s by buying everything in a service kit

For models with electronic ignition see SIA14004, if you have a deep sump you'll need an extra sump gasket (ENA14036). Oils and lubricants available separately See ENA95006 for gauze oil filter tab washer. The oils you need are 1 x OIA11036 and 1 x OIA08194

 This part is due back in stock soon, call 01484 841395 to reserve yours

Smoked fairing screen, flip edge

May come with or without mounting holes- you may need to drill these before fitting

 This part is available by special order, request a quote

 28577250 GU28577250 28 57 72 50
 2857 7250 2857.7250 28.57.72.50

Profesionally rebuilt Brembo PS 15 rear master cylinder for models with a remote reservoir. Mounting holes at 50mm centres.

Brembo ref. 10.2934.02
Usually supplied as a bare master cylinder with a piston installed. Spring, operating lever and input elbow may not be included. See BRA19500 for the elbow that the fluid supply pipe fits on to and BRA19667 for the return spring. Send us your old rebuildable (i.e. with a undamaged bore) PS15 for a £10 credit against your next order.

 19667000 GU19667000 19 66 70 00
 1966 7000 1966.7000 19.66.70.00