UFI 31 760 00 fuel filter, connectors not threaded. On late CARC models (e.g. Stelvio) check that the code 05107230 is present on the fuel pump flange

In tank fuel filter. Also known as Guzzi ref. 32106060, see FUA01091 for alternative filter from Mahle. See FUA20004 for fuel pipe clips for this filter and FUA81000 for in tank fuel hose

 4 in stock

 01106090 GU01106090 01 10 60 90
 0110 6090 0110.6090 01.10.60.90

Also fits Aprilia Dorsoduro 1200 (2010-2013), Aprilia Dorsoduro 750 - ABS (2008-2015), Aprilia Dorsoduro 750 Factory - ABS (2010-2013), Aprilia Shiver 750 (2007-2009), Aprilia Shiver 750 (2010-2013), Aprilia Shiver 750 GT 2009, Aprilia Shiver 750 USA (2011-2014)

Dellorto 105 main jet for Dellorto PHBH, VHB26 and VHB24 carbs

Not for VHB29 or VHB30.
If you have fitted free flowing individual air filters like our S & B filters to your carbs you may need to increase jet size by 10%. We recommend FUA64115 for bikes originally equipped with 105 main jets

 4 in stock

 19935750 GU19935750 19 93 57 50
 1993 5750 1993.5750 19.93.57.50

Rocker cover breather pipes

Also known as Guzzi ref. 23159660, 23159670, 27159660

 4 in stock

 23159671 GU23159671 23 15 96 71
 2315 9671 2315.9671 23.15.96.71

Fuel pipe assembly including 'x' crossover piece

See FUA00004 for pipe clips. Can also be used in place of Guzzi ref. 12106501 on Loop frame models if cut to length

 4 in stock

29106500-z 29106500 GU29106500 29 10 65 00
 2910 6500 2910.6500 29.10.65.00

Also fits Guzzi V7 Special, V7 700

NGK B8ES spark plug for Motoplat equipped bikes

See TOA00014 for spark plug spanner

 4 in stock

A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models

Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230

 4 in stock

 01659230 GU01659230 01 65 92 30
 0165 9230 0165.9230 01.65.92.30

A2 stainless socket cap screw M8 x 35mm, many applications including top yoke pinch bolt and fork leg pinch bolts (T3, 1000 SP, Le Mans 1000, Cali 3 etc...), top yoke to stem pinch bolt and gearbox bellhousing to crankcase on V50, V35 and V65

 4 in stock

"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

 4 in stock

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   4 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

• Valve body, CNC precision turned part made of high quality steel
• Copper crush washer
• Hose connector, CNC precision turned part made of high quality steel
• High quality hose 40cm long
• Protection cover made of aluminum, anodized
• Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

 4 in stock