Drilled front brake rotor. This replacement rotor is manufactured using a modern steel and will not rust like the original

Attaches via M6 threaded holes using SSA06016.

 This part is available by special order, request a quote

 14613350 GU14613350 14 61 33 50
 1461 3350 1461.3350 14.61.33.50

Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle). Supplied with bleed nipples, dust cover, pins and spring. This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 Availability varies on this part, check availability

Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.

Brake pads not included- see BRA33204

 This part is available by special order, request a quote

Brake pipe linking front right hand caliper to handlebar mounted master cylinder

Original type rubber brakeline with chunky galvanized ends

 This part is available by special order, request a quote

14657150-z 14657150 GU14657150 14 65 71 50
 1465 7150 1465.7150 14.65.71.50

Front left hand brake pipe linking caliper to rigid pipe under fuel tank

Original type rubber brakeline with chunky galvanized ends

 This part is available by special order, request a quote

14658851-z 14658851 GU14658851 14 65 88 51
 1465 8851 1465.8851 14.65.88.51

Rear brakeline from splitter or proportioning valve to rear caliper fixed pipe. Also used as lower front right hand pipe to caliper fixed pipe on T3

Original type rubber brakeline with chunky galvanized ends

 This part is due back in stock soon, call 01484 841395 to reserve yours

17657550

Fixed rigid brake pipe linking front and rear of linked system, located under fuel tank

Original type rigid brake line

 This part is due back in stock soon, call 01484 841395 to reserve yours

17658750

Flexible brake pipe from linked master cylinder to proporting valve or rear manifold

Original type rubber brake line with chunky ends

 This part is available by special order, request a quote

18658560

Threaded linkage block used on brake or gear linkages (varies by model). Screws to M6 threaded rod

Wears over time, so we recommend replacing if your gear or brake linkage is sloppy

 This part is available by special order, request a quote

 18257551 GU18257551 18 25 75 51
 1825 7551 1825.7551 18.25.75.51

M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap

 Availability varies on this part, check availability

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,