A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

 More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock

Hex head brake disc bolt for front discs

Also known as Guzzi ref. 03611445. 6 bolts required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing

 More than 5 in stock

AP8152286

Bright zinc finish M8 hex head bolt, used as rear brake disc bolts on Le Mans 3 etc...

Rear disc bolt

 More than 5 in stock

 98052450 GU98052450 98 05 24 50
 9805 2450 9805.2450 98.05.24.50

49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I

 More than 5 in stock

Pair of EBC FA047 brake pads for Brembo F05 (P5) calipers and Grimeca front calipers

 More than 5 in stock

27654610-z 27654610 GU27654610 27 65 46 10
 2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS, Ducati Pantah 500SL, Magni Sfida

Bright zinc finish M8 hex head bolt, used as rear brake disc bolts on T3 etc...

Rear disc bolt for T3. 6 bolts required per disc

 More than 5 in stock

 98052445 GU98052445 98 05 24 45
 9805 2445 9805.2445 98.05.24.45

Circlip used for retaining brake disc on Tonti framed models, used for gearbox applications on later bikes

 More than 5 in stock

 90271022 GU90271022 90 27 10 22
 9027 1022 9027.1022 90.27.10.22

Upper short spring for rear brake shoes

 More than 5 in stock

25638200-z 25638200 GU25638200 25 63 82 00
 2563 8200 2563.8200 25.63.82.00

Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

 More than 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)