The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares Nevada 201991-2003 20 Brakes

Sort by Title

Sort by Price

Page 4 of 9

1 2 3 4 5 6 7 8 9

Single Banjo Bolt M10 Stainless Steel Kit Fine Thread

BRA01001 Universal Part

Dimensions:
M10 x 1

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

part in stock 2 in stock

95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

£8.40

INC VAT

£7.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Mounting Bolt

BRA14556 Fits Breva ALL, 1200 Sport (2v/cyl), Norge ALL, V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, Nevada 750 (2004-2013)

Dimensions:
M10 x 28mm

Mounting bolt for brake caliper, bolts caliper to fork leg. Supplied in zinc finish.

part in stock 2 in stock

AP8152385

£5.98

INC VAT

£4.98 EX VAT this is the price you will pay if you are ordering from outside the UK

Bolt Rear Brake Disc

BRA30460 Fits T5 Polizia (1995-2001), Bellagio, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Cali 1400 ALL, V11 Sport, Nevada 750 (1998-2001), Daytona, Griso ALL, Norge ALL, Strada 1000, 1100 Sport ALL, Centauro, V11 Sport, 750X, Breva 1100, Breva 1200, 1200 Sport, Stelvio

Dimensions:
M8 with 10mm OD shoulder

Socket cap brake disc bolt with shoulder for rear brake disc

6 bolts required per disc. Also used as front disc bolt on T5 Polizia (1995-2001) and for EBC discs with 10mm bolt holes

part in stock 2 in stock

30611460 GU30611460 30 61 14 60
3061 1460 3061.1460 30.61.14.60

£3.50

INC VAT

£2.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch

ELA30749 Fits Cali EV (2002-2008), Cali Classic, Cali Vintage, Cali Aquila Nera, Nevada 750 (2004-2016), 1200 Sport, Bellagio, Breva ALL, Griso ALL, Norge ALL, Stelvio, V7 Classic, V7 Racer, V7 Stone, V7 Special, V7 II ALL, V7 III ALL, V9 ALL

Dimensions:
29mm x 24mm x 12mm excluding switch and spade connectors

Brakelight switch

Stop light switch also known as Guzzi ref. AP8224192
See FRA98412 for mounting screw

part in stock 2 in stock

03749845-z 03749845 GU03749845 03 74 98 45
0374 9845 0374.9845 03.74.98.45

£15.50

INC VAT

£12.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Front Brake Caliper Overhaul Kit Brembo Goldline P30/34

BRA19723 Fits Nevada 750 (2003-2016), V7 I ALL, V7 II ALL, V7 III ALL, Breva ALL, Griso 1100, Norge ALL, Cali Vintage, Cali EV (1997-2009), Cali Sport (2001-2003), 1200 Sport, V11 Sport, Daytona, 1100 Sport, Cali Jackal, Cali Stone

Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

part in stock 2 in stock

£34.00

INC VAT

£28.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads F05 Calipers EBC Sintered FA047HH

BRA19725 Fits V35 ALL, V50 ALL, V65 ALL, V75, 750 Targa, Strada 750, Daytona ALL, 1100 Sport ALL, Centauro, V11 Sport, Nevada 750 (1991-2002), Nevada 350, 750 SP, 750T

Dimensions:
8mm overall thickness

Pair of EBC FA047 sintered brake pads for Brembo F05 (P5) and Grimeca calipers for extra braking power

Fits Nevada up until frame no. LK112433 Fits all calipers on pre 1993 models

part in stock 2 in stock

27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Master Cylinder Cap and Rubber Front Brembo PS13

BRA03661 Fits Breva 750, V7 Cafe, V7 Classic, V7 Racer, V7 Stone, V7 Special, Cali EV (2003-2012), Cali Stone, Nevada 750 (2004-2013), V7 II ALL

Front brake master cylinder cap and rubber kit for Brembo PS 13 master cylinder. Check the screw holes in your master cylinder are diagnally opposed (as seen top left and bottom right corners when sitting on bike)

Reservoir cap replaces Guzzi ref. 2B001928

part in stock 2 in stock

03661145 GU03661145 03 66 11 45
0366 1145 0366.1145 03.66.11.45

£54.00

INC VAT

£45.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve Cover

BRA41652 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT

Dimensions:
9.5mm ID x 16mm overall height

Black cover or cap for Stahlbus M6 bleed valve. Prevents contamination of the valve and smartens up your brake caliper

part in stock 2 in stock

£5.70

INC VAT

£4.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Rear Brake Caliper Overhaul Kit

BRA01723 Fits 750T, Nevada 750 (1993-1998), Nevada 350, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Centauro

Rebuild kit for Brembo P32 rear caliper. This is a comprehensive overhaul kit containing replacement dust seals, fluid seals, o ring, bleed nipple, dust cap, washers, brake grease and caliper bolts. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

part in stock 2 in stock

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M8 Bleed Nipple

BRA41654 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone

Dimensions:
M8 x 1

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover. Fits front calipers only on models listed above.
2 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 4 of 9

1 2 3 4 5 6 7 8 9