The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Used Spares Daytona Centauro MGS-01 Electrics

Sort by Title

Sort by Price

Page 8 of 11

1 2 3 4 5 6 7 8 9 10 11

Bosch Starter Motor Brush Set

ELA52536 Fits 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75 ALL, Cali 1100, Cali EV, Cali Jackal, Cali Stone, V11 Sport, 1100 Sport, Centauro, Daytona, Nevada ALL

Brush kit for overhauling Bosch starter motor

The brush connections need to be soldered

part in stock 1 in stock

£11.00

INC VAT

£9.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Starter Lead Boot

FRA19077 Fits V35 ALL, V50 ALL, V65 ALL, V75 ALL, Nevada 750 ALL, 850/1000 ALL Models, Cali EV, Cali 1100, Daytona ALL, V11 Sport

Dimensions:
14mm ID at battery terminal, 10mm ID for battery lead

Rubber cover for starter motor lead from battery, prevents accidental earthing

Can also be used for M6 battery terminal lead ends

part in stock 1 in stock

19707100-z 19707100 GU19707100 19 70 71 00
1970 7100 1970.7100 19.70.71.00

£12.50

INC VAT

£10.42 EX VAT this is the price you will pay if you are ordering from outside the UK

6 Pin Male Block Connector

ELA30000 Universal Part

Dimensions:
25mm x 6mm x 25mm

6 pin male block connector, used for main loom connections. See ELA30001 for female 6 block connector.

part in stock 1 in stock

200073020

£3.60

INC VAT

£3.00 EX VAT this is the price you will pay if you are ordering from outside the UK

4 Pin 2 x 2 Male Block Connector

ELA20076 Fits V35 ALL, V50 ALL, V65 ALL, 850/1000 ALL models, Quota 1100, Centauro, 1100 Sport

4 pin male block connector arranged in two rows of two used for main loom connections. See ELA17738 for the Molex connectors that go in this block. Use female molex connectors with this block

part in stock 1 in stock

£2.30

INC VAT

£1.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Brake Light Switch Double Banjo Fine Thread Stainless Steel

BRA01003 Universal Part

Dimensions:
M10 double banjo fine thread

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

part in stock 1 in stock

£24.50

INC VAT

£20.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle Position Sensor

ELA30501 Fits Cali 1100 Series 1 (1994-1997), Cali 3 IE, Daytona RS, Centauro, MGS-01

TPS for throttle body

On Cali 1100 check which TPS you have (varies according to ECU)

part in stock 1 in stock

30530501 GU30530501 30 53 05 01
3053 0501 3053.0501 30.53.05.01

£109.00

INC VAT

£90.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Starter Motor and Solenoid

ELA30837 Fits 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75 ALL, Nevada 750 (1991-2008), Breva 750, Cali 1100, Cali EV, Cali Jackal, Cali Stone, Cali Classic, Cali Vintage, V11 Sport, 1100 Sport ALL, Centauro, V7 700, V7 Special (1969-1971), 850GT, Eldorado, Ambassador

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

part in stock 1 in stock

30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11

£125.00

INC VAT

£104.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Brake Light Switch Single Banjo Fine Thread Stainless Steel

BRA01004 Universal Part

Dimensions:
M10 single banjo fine thread

Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder

NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060

This part is due back in stock soon, call 01484 841395 to reserve yours

£29.50

INC VAT

£24.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Switchgear L/H Pattern (Dip, Horn, Indicators and Pass)

ELA01729 Universal Part

Dimensions:
350mm lead

Left hand Domino type switchgear with high and low beam, pass, indicator and horn switches. Same style switch as ELA01738

On most bikes this will not plug directly into the wiring loom, you will need to match the wires to your loom. An indication of wire colours is supplied with this switchgear. Supplied with 9 pin block connector. NB does not have lights off - park - on function, you need this to be on your RH switch (e.g. ELA01729 ) or run lights always on

This part is available by special order, request a quote

£88.00

INC VAT

£73.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Lead Rubber

ELA14600 Universal Part

Dimensions:
26mm OD x 36mm

HT lead rubber, used where HT lead screws onto plug cap or pushes onto ignition coil

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14717600 GU14717600 14 71 76 00
1471 7600 1471.7600 14.71.76.00

£2.50

INC VAT

£2.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 8 of 11

1 2 3 4 5 6 7 8 9 10 11