Shop headings: New Spares | Used Spares | Accessories | Brands
Remote (head mounted) barrel choke lever
Cables available separately. Also known as Guzzi ref. 27133160, 17133150, 23133100
2 in stock
17133151 GU17133151 17 13 31 51
1713 3151 1713.3151 17.13.31.51
£15.00
INC VAT
£12.50 EX VAT
Fuel pipe assembly including 'x' crossover piece
See FUA00004 for pipe clips. Can also be used in place of Guzzi ref. 12106501 on Loop frame models if cut to length
2 in stock
29106500-z 29106500 GU29106500 29 10 65 00
2910 6500 2910.6500 29.10.65.00
Also fits Guzzi V7 Special, V7 700
£20.00
INC VAT
£16.67 EX VAT
Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHF 30 carb conversions on models previously fitted with VHB30 carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)
Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts. Can be used to replace PHF30 inlet manifolds 17116265 and 17116365 which are no longer available. These manifolds exit the heads at a different angle to VHB manifolds and in some cases you may need to modify side panels to allow clearance for air filters
2 in stock
£39.00
INC VAT
£32.50 EX VAT
Single fuel union or banjo for Dellorto carb
See FUA60888 for fuel union filters
2 in stock
13934600 GU13934600 13 93 46 00
1393 4600 1393.4600 13.93.46.00
£3.50
INC VAT
£2.92 EX VAT
Dellorto choke jet size 70
2 in stock
14936050 GU14936050 14 93 60 50
1493 6050 1493.6050 14.93.60.50
£7.75
INC VAT
£6.46 EX VAT
Dellorto Main Jet Size 120 VHB29/30 only. If you have fitted free flowing individual air filters like our S & B filters to your carbs you may need to increase jet size by 10%. We recommend FUA86132 for bikes with S & B filters that were originally equipped with 120 main jets
VHB29 and VHB30 originally fitted to V7 Special, 850 GT,750S, S3, 850T, T3, T4, T5 Series 1 & 2, 1000 SP, Convert, G5, Cali 2
2 in stock
£5.15
INC VAT
£4.29 EX VAT
Slide top cover screw for VHB 24, VHB 26, VHB 29 and VHB 30 carb, two required per carb
2 in stock
13932800 GU13932800 13 93 28 00
1393 2800 1393.2800 13.93.28.00
£0.90
INC VAT
£0.75 EX VAT
Threaded straight cable adjuster with M5 thread
Supplied with nut, used for various carb and choke cables cable splitters
2 in stock
28607678 GU28607678 28 60 76 78
2860 7678 2860.7678 28.60.76.78
£4.20
INC VAT
£3.50 EX VAT
Dellorto V5 slide needle for VHB 30 carbs. The original V9 needle has limited availability and this is the closest alternative. Drop the V5 needle by one groove to simulate the V9 needle
The V5 needle has also been discontinued so stocks are limited. Standard needle clip position is 2nd groove from top
1 in stock
13937700 GU13937700 13 93 77 00
1393 7700 1393.7700 13.93.77.00
£18.00
INC VAT
£15.00 EX VAT
Carb mounted flip choke with plunger, lever, O ring, casting and spring. Insufficient clearance on high top carbs to operate the choke and the throttle cable
Fits all PHF30 - PHF36 and VHB30 Dellorto flat top carbs, contains rubber seat insert. Allows you to eliminate the choke cables and any handlebar choke controls for a cleaner look, especially suitable for special builds
1 in stock
14937800 GU14937800 14 93 78 00
1493 7800 1493.7800 14.93.78.00
£21.80
INC VAT
£18.17 EX VAT