Shop headings: New Spares | Used Spares | Accessories | Brands
Stainless steel fine thread M12 half nut, many uses e.g. front engine mounting bolt and gear/brake lever pivot on big twins
M12 nut
More than 5 in stock
92602512-z 92602512 GU92602512 92 60 25 12
9260 2512 9260.2512 92.60.25.12
£2.00
INC VAT
£1.67 EX VAT
Stainless retaining bolt for oil filter cover
Stainless socket cap
This part is due back in stock soon, call 01484 841395 to reserve yours
27152885 GU27152885 27 15 28 85
2715 2885 2715.2885 27.15.28.85
£3.00
INC VAT
£2.50 EX VAT
Stainless steel after market exhaust stud
M6 exhaust stud. See ENA31881 for stud nut. Note that unlike the originals these studs are threaded along their entire length.
More than 5 in stock
96506042 GU96506042 96 50 60 42
9650 6042 9650.6042 96.50.60.42
£3.60
INC VAT
£3.00 EX VAT
Large rear UJ joint gaiter clip
More than 5 in stock
12548201 GU12548201 12 54 82 01
1254 8201 1254.8201 12.54.82.01
£3.90
INC VAT
£3.25 EX VAT
Stainless steel hose clamp, various applications
Used to clamp inlet manifold (FUA19114) on Nevada (pre 2004), V65, V65 Florida, Lario, Monza and V50 3
More than 5 in stock
93305032 GU93305032 93 30 50 32
9330 5032 9330.5032 93.30.50.32
£3.90
INC VAT
£3.25 EX VAT
Rocker cover screw kit containing 12 replacement stainless steel socket cap bolts for two valve small twin rocker covers. Only one kit required per engine. Only for twin throttle body V7 models
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted. This kit contains the correct screws for the Breva 750 and 2004 on V7 models but does not include the two flanged M5 screws SSA81523 that fasten the rocker cover covers to the rocker cover (on models other than the V7 Racer)
More than 5 in stock
£5.00
INC VAT
£4.17 EX VAT
Stainless M10 x 1.25 steel banjo bolt, coarser thread (1.25) than most brake fittings. See BRA01001 for M10 x 1 banjo bolt for most other brake fittings and models
2 in stock
£5.00
INC VAT
£4.17 EX VAT
Brilliant chrome, aluminium and metal polish.
Make your Guzzi gleam.
1 in stock
£6.50
INC VAT
£5.42 EX VAT
M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
Availability varies on this part, check availability
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£7.00
INC VAT
£5.83 EX VAT
Stainless steel M10 double banjo bolt for aluminium coloured brake manifolds only, used with front yoke mounted splitter on some small twins
Supplied with 3 crush washers
This part is available by special order, request a quote
95990034 GU95990034 95 99 00 34
9599 0034 9599.0034 95.99.00.34
£7.20
INC VAT
£6.00 EX VAT