K&N high performance air filter, flat paper cartridge type

• High Air Flow with Excellent Filtration
• Designed to Increase Horsepower and Acceleration
• Washable and Reusable
• Will NOT Void Vehicle Warranty
• Lasts up to 50,000 miles before cleaning is required depending on driving conditions
• K&N Million Mile Limited Warranty�
• Emissions Legal
• Economical, a K&N Air Filter Will Last the Life of Your Bike
• Works with Original Equipment Manufacturer Vehicle Electronics
• Easy High Performance Add-on
• Environmentally Friendly

 1 in stock

AP8104329

Dimensions:
180mm x 125mm x 38mm

Air filter, flat paper cartridge type

See SIA10433 for a reusable K & N air filter

 4 in stock

AP8104329

Dimensions:
180mm x 125mm x 38mm

Performance 2-1 connecting pipe or H pipe. This mid pipe is less than half the weight of the original pipe and will make a significant improvement to both the exhaust note and performance of your V85 TT when combined with a performance silencer and air filter SIA10433

Gaskets not required with this crossover, the Y piece fits direct. A performance exhaust crossover for your V85TT

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

A beautiful brushed stainless finish silencer made by Agostini of Mandello del Lario. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85199 and performance air filter SIA10433
Agostinis are in the process of getting these homologated.

 Order now and we will post your order within 28 days.

A beautiful black stainless steel silencer with bright end cap. Made by Agostini of Mandello del Lario. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85199 and performance air filter SIA10433
Agostinis are in the process of getting these homologated.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

Performance 2-1 connecting pipe, de-CAT or H pipe. This mid pipe is 2kg lighter than the original pipe and will make a significant improvement to both the exhaust note and performance of your V85 TT when combined with a performance silencer and air filter SIA10433. We also recommend fitting a V-Twin Boost plug-in FUA85001 with this CAT eliminator to enrich the mixture

• Y piece made from AISI304 stainless steel
• Installation with graphite bushings to limit the transmission of vibrations
• Fixing bracket with antivibration silent block
• Straight through design for better performance and deeper sound
• Larger diameter internals for better exhaust gas flow
• This crossover is compatible with original system components
• Reduces engine operating temperature for better fuel consumption and efficiency
• Includes exhaust bushes
• Modern satin finish
• Manufactured on the shores of Lake Como and developed using a rolling road

 Order now and we will post your order within 28 days.

Black stainless steel conical silencer with brushed stainless steel conical end cap. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.3kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer . These are compatible with factory panniers

To achieve maximum performance gains also fit link pipe EXA85629, velocity stack EXA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85003
Benefits of Mistral silencers:

• Simple assembly
• Low weight
• No remap required
• EURO5+ approved
• Full and deep sound
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Specific carbon fiber heat shield included
• Handcrafted product

 Order now and we will post your order within 28 days.

Satin finish stainless steel conical silencer with conical end cap. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.3kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

To achieve maximum performance gains also fit link pipe EXA85629, velocity stack EXA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85003
Benefits of Mistral silencers:

• Simple assembly
• Low weight
• No remap required
• EURO5+ approved
• Full and deep sound
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Specific carbon fiber heat shield included
• Handcrafted product

 Order now and we will post your order within 28 days.

Ice grey finish stainless steel conical silencer with black Avion end cap. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.3kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

To achieve maximum performance gains also fit link pipe EXA85629, velocity stack EXA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85003
Benefits of Mistral silencers:

• Simple assembly
• Low weight
• No remap required
• EURO5+ approved
• Full and deep sound
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Specific carbon fiber heat shield included
• Handcrafted product

 Order now and we will post your order within 28 days.

Black stainless steel conical silencer with black Avion end cap. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.3kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

To achieve maximum performance gains also fit link pipe EXA85629, velocity stack EXA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85003
Benefits of Mistral silencers:

• Simple assembly
• Low weight
• No remap required
• EURO5+ approved
• Full and deep sound
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Specific carbon fiber heat shield included
• Handcrafted product

 Order now and we will post your order within 28 days.