Brakelight switch

Stop light switch also known as Guzzi ref. AP8224192
See FRA98412 for mounting screw

03749845-z 03749845 GU03749845 03 74 98 45
 0374 9845 0374.9845 03.74.98.45

Dimensions:
29mm x 24mm x 12mm excluding switch and spade connectors

High quality German made Mahle OE quality cartridge oil filter with sealing rubber.

From late 2015 onwards 1200 models used SIA06428

Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filter which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring and SIA10900 for the sump plug seal

 30153000 GU30153000 30 15 30 00
 3015 3000 3015.3000 30.15.30.00

Dimensions:
75mm diameter overall

Pair of YSS rear shock absorbers, milled aluminium body with black springs.

Continuous preload adjustment, fully rebuildable

Dimensions:
390mm mounting centres, 12mm ID bushes, 46mm OD spring

Complete 850cc piston and Nigusil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is T3 spec (low compression)

Components for one cylinder

17060150-z 17060150 GU17060150 17 06 01 50
 1706 0150 1706.0150 17.06.01.50

Dimensions:
83mm bore

Output oil seal for drive box

This oil seal fits output side of bevel box

90407085-z 90407085 GU90407085 90 40 70 85
 9040 7085 9040.7085 90.40.70.85

Dimensions:
70mm x 85mm x 8mm

Chromed fork stanchion

 14525401 GU14525401 14 52 54 01
 1452 5401 1452.5401 14.52.54.01

Dimensions:
35mm OD x 545mm

Rocker cover gasket

This gasket is wider than ENA18001, but ENA18001 can be substituted. Many mechanics report that ENA18001 makes a better seal

 976139 MG976139

Air filter, cylindrical paper cartridge type

See SIA10422 for a reusable K & N air filter

AP8104211

Dimensions:
128mm external diameter, x 112mm

8 sided UFI 23 287 00 cartridge oil filter with sealing rubber.

From late 2015 onwards 1200 models used SIA06428

See SIA15301 for alternative filter from Mahle. Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 8 sided oil filter. Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump



See ENA90948 for the oil filter cover o ring and SIA10900 for the sump plug seal

 30153000 GU30153000 30 15 30 00
 3015 3000 3015.3000 30.15.30.00

Dimensions:
84mm x 77mm diameter overall, for 19mm OD spigot. HF552 is probably Hi Flo alternative

Long screw in polished alloy thermometer dipstick with O ring for models with a sump extension. Shows oil temperature in degrees celcius

Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

28004950-z 28004950 GU28004950 28 00 49 50
 2800 4950 2800.4950 28.00.49.50

Dimensions:
160mm from end to sealing o ring, 20mm thread