2 valve engine with flywheel included. Engine Turns Over. Includes 1 conrod and no pistons. Supplied without charging or ignition system. Mileage unknown (likely less than 30k miles).

Collection only, spares or repair.

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

PE021776

Brembo master cylinder rebuild kit for overhauling handlebar mounted PS 15 master cylinders. Includes all seals, circlip and brake grease

This seal kit also known as Guzzi refs. 079539686, 079539632, 079539739, 079539685, 079539680 and 079539633. See this link for help with fitting this kit.

This kit has been superceded by BRA37233

 Sorry, this part is no longer available.

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Dellorto choke piston or plunger for Dellorto VHB, PHBH, PHF and PHM carbs. Includes rubber seal in end of plunger

 4 in stock

 13937800 GU13937800 13 93 78 00
 1393 7800 1393.7800 13.93.78.00

1 Litre of Millers Classic Pistoneeze SAE20W-50 mineral oil. We recommend this classic engine oil for older (pre 1998) 2 valve twins, it is similar to Castrol GTX 20/50 (which is no longer available). Pistoneeze 20w50 is a moderate detergent premium SAE 20w50 multigrade mineral engine oil. The formulation includes high quality solvent refined base oils with the latest technology performance additives and shear stable viscosity index improver.

Features & Benefits:

• Incorporates modern additive technology with period viscometrics to provide the optimum lubrication characteristics
• Suitable for higher mileage applications where oil consumption is a problem
• Meets up-to-date specifications along with meeting period performance requirements
• Specific gravity at 15C: 0.833
• Kinematic viscosity at 100C: 18.5cSt
• Kinematic viscosity at 40C: 156.8cSt
• Viscosity index: 133

  
  Quantities required:

  • 850/1000 ALL Models, Cali 1100, Quotas - engine: 3l
  • V35, V50, V65, V75 - engine: 2l
  
  
  See ENA41653 for a oil drain kit for your oil change
  
  Please note this oil CANNOT be posted outside of the UK mainland area.

   More than 5 in stock

  Also fits Triumph Bonneville T100

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Piston for oil pressure relief valve in lower crankcase

 This part is due back in stock soon, call 01484 841395 to reserve yours

 31150950 GU31150950 31 15 09 50
 3115 0950 3115.0950 31.15.09.50

1 litre of Eni I-Ride Special 20W-50. Eni i-Ride Special 20W-50 is a lubricating product formulated with high quality mineral oil bases, designed for four-stroke engines that are fitted in newly-manufactured motorcycles. This product is suitable for on-road and off-road driving, and is able to guarantee maximum performance even under extreme engine operating conditions.

The good detergent and dispersing properties of Eni i-Ride Special 20W-50 effectively minimize the formation of lacquers, sludge and other types of deposits. This product prevents the piston rings sticking and prevents the precipitation of the suspended substances.

The anti-wear properties of this product allow a long service life of the moving parts, reducing engine maintenance and overhaul.

Eni i-Ride Special 20W-50 has a strong resistance to the deterioration of its characteristics and in particular to the oxidative phenomena resulting from prolonged exposure in high temperature conditions and in the presence of air and other agents.

Surpasses API SJ, JASO MA and MA2. ENI oils were previously sold under the AGIP name

 1 in stock

Pair of EBC FA095 brake pads for Brembo 5165 single pin four piston calipers

We advise checking your front caliper(s) have one not two pad pins

 4 in stock

30654602-z 30654602 GU30654602 30 65 46 02
 3065 4602 3065.4602 30.65.46.02

Also fits Magni Sfida

Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.

NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722

 2 in stock

 20391310 GU20391310 20 39 13 10
 2039 1310 2039.1310 20.39.13.10

Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)

Pair of Ferodo FRP408 brake pads for Brembo 5165 4 piston single pin calipers

We advise checking your front caliper(s) have one not two pad pins.
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors Highest friction level available for motorcycle racing Developed by world champions for future world champions Stable friction level achieving excellent modulation Fast bedding-in period Applications to fit all major racing calipers Suitable for stainless steel and cast iron discs

 2 in stock

30654602-z 30654602 GU30654602 30 65 46 02
 3065 4602 3065.4602 30.65.46.02

Replacement piston seals and spring for Grimeca front master cylinder

See BRA28278 for a complete replacement master cylinder

 Sorry, this part is no longer available.

 30659330 GU30659330 30 65 93 30
 3065 9330 3065.9330 30.65.93.30