M8 crush washer used for cylinder head oil lines and other applications, supplied in aluminium or copper

Can be used in place of copper crush washer 856046

 12154200 GU12154200 12 15 42 00
 1215 4200 1215.4200 12.15.42.00

Dimensions:
8.3mm inner diameter x 1mm

Stainless steel braided hose oil lines for heads. Head connectors are not included

Always replace crush washers (SIA12200) when replacing oil lines

 05153630 GU05153630 05 15 36 30
 0515 3630 0515.3630 05.15.36.30

Titanium rocker feed and breather M8 banjo bolt

Made specially for Gutsibits in corrosion resistant grade 5 titanium. Use with SIA12200 crush washer

 95990037 GU95990037 95 99 00 37
 9599 0037 9599.0037 95.99.00.37

Dimensions:
M8 x 1.25

Stainless steel braided hose oil pipes for head to crankcase connection. Includes V shaped banjo

Always replace crush washers (SIA12200) when fitting new oil lines. Superceded by Guzzi ref. 02153601

 This part is available by special order, request a quote

 30153600 GU30153600 30 15 36 00
 3015 3600 3015.3600 30.15.36.00

Dimensions:
Reach of approx. 250mm from crankcase

Stainless steel braided hose oil pipes for head to crankcase connection. Replaces leak prone rubber pipes. Includes V shaped banjo.

Always replace crush washers (6 x SIA12200) when fitting new oil lines, you may also require three of our banjo bolts ENA95990

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 14153601 GU14153601 14 15 36 01
 1415 3601 1415.3601 14.15.36.01

Dimensions:
Reach of approx. 190mm from crankcase

A2 stainless socket cap screw M8 x 90, used to retain oil filter cover on some small twins. See SIA12200 for crush washer for this sump bolt

 98052490 GU98052490 98 05 24 90
 9805 2490 9805.2490 98.05.24.90

Dimensions:
M8 x 90mm

Oil return pipe with threaded union for sump

Can be used in place of GU32159310 on late V7 models if pipe is cut and breather valve from old pipe inserted into cut section.
Uses crush washer SIA12200

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

27159360-z 27159360 GU27159360 27 15 93 60
 2715 9360 2715.9360 27.15.93.60

Dimensions:
7mm ID x 12mm OD x 990mm

Stainless steel braided hose oil lines for heads on square barrel models. See ENA14662 if you also need threaded link to cylinder head

Always replace crush washers (SIA12200 x 2 and SIA10900 x 2) when replacing oil lines, you may also require our banjo bolt ENA95990. Also known as Guzzi ref. 01153600 and 01153602

 14153660 GU14153660 14 15 36 60
 1415 3660 1415.3660 14.15.36.60

Dimensions:
Reach of approx. 170mm from central banjo to head

Oil return pipe with threaded union for sump

Equivalent to Guzzi ref. B063213
Uses crush washer SIA12200. NB breather valve no included - you should reuse the valve from your old pipe. Superceded by ENA27360 (cut to length)

 Sorry, this part is no longer available.

32159310-z 32159310 GU32159310 32 15 93 10
 3215 9310 3215.9310 32.15.93.10

Dimensions:
7mm ID x 12mm OD x 200mm

UFI 25 531 00 cartridge oil filter for 1989 on small block engines. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick

For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer). Some 750 XPA models use SIA19530, we advise you to check your old filter before ordering. Also known as Guzzi ref. 2A000633

 27153085 GU27153085 27 15 30 85
 2715 3085 2715.3085 27.15.30.85

Dimensions:
120mm x 45mm diameter overall